Question about Ariston Technologies AWD120 13 lb. Washer / Dryer Combo

2 Answers

It appears F13 error - Ariston Technologies AWD120 13 lb. Washer / Dryer Combo

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi sir we have ARISTON washer and DRYER model : AQXXMD129EX its a error coming F13 please help me soon

Posted on Mar 01, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

F13 says that the NTC thermistor is faulty, or the main power board needs replacing

Posted on Jan 18, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1294 Answers

SOURCE: machine fault code "f13"

Plug off the wall. There is a thin rubber tube going from the switch area to the exit near the outlet tube. Probably this is blocked. This tube should be free from any blockage; take out the top clip from this tube and blow into it - it should be free, clear the blockage if any and refit. This is the water level tube which tells the machine when to switch off water, etc.....

Posted on Sep 03, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F13 and F11 codes pop up


F13 is
Dispenser Circuit Error
If the dispenser motor is not able to be driven to it's proper position.
Check mechanical linkage from dispenser motor to the top of the dispenser
Check Wire Harness connections to the dispenser motor and Central Control Unit (CCU)
Check Dispenser Motor

i snagged this answer from another site
i think its a worn bit of plastic
as it becomes britten when not always wet
much like a boat out of water

Mar 05, 2015 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Frigidaire fault code f13 kitchen range what does that mean ?


Thank you for your inquiry, raymond bouley!

I understand that your Frigidaire range is displaying an error code of "F13". An "F13" error code typically stands for a bad EEPROM (Erasable Programmable Memory) identification or check sum error. The best way to clear this code is to disconnect power from your range for roughly ten minutes. If you continue to experience an issue it could be a possible that you have a faulty board or wiring harness. I would then recommend having a professional out to perform a diagnosis on your range. Hope this helps. -Matt

Jan 13, 2015 | Frigidaire Kitchen Ranges

2 Answers

What does F13 Error mean?


Hello,

Here is what the F-13 error code means and the fix for it.

F13 Internal CPU checksum errors 1. Disconnect power for 1 minute.
2. Reconnect power.
3. If failure remains, replace the touch control module

So it says the main computer control had detected a error in the touchpad control

I hope this helps,

Gene

Aug 01, 2011 | Kitchen Ranges

1 Answer

F13 appeared on the display. Can you tell me what this means


Hi from retired Englishman in SW France,
'F13' for a Dyson (CR01) stands for 'heating error. There is likely to be a problem with either the heater element or the temperature sensor. Both require a service engineer's attention I suggest ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Jun 27, 2011 | Dyson Washing Machines

1 Answer

I have a F13 fault that wont reset on a AWOE9759. I do not know what a F13 fault is but i have tried what it says to do in the manual. Please help.


F13 Error = Dispenser circuit error
If the dispenser motor is not able to be driven to it's proper position.

Potential Causes

• Check mechanical linkage from dispenser motor to the top of the dispenser.
• Check Wire Harness connections to the dispenser motor and Central Control Unit (CCU)
• Check Dispenser Motor

Replace failed component.

Dec 26, 2010 | Whirlpool Washing Machines

2 Answers

My AWOE8748 had a fault code F13. It has now switched itself completely off.


Hi,

F13 indicates "Dispenser Circuit Error" in your washer.If the dispenser motor is not able to be driven to it's proper position this error code appears.Check mechanical linkage from dispenser motor to the top of the dispenser. The wire harness connections to the dispenser motor and Central Control Unit (CCU) would have been faulty so check for those.Also do a final check on dispenser motor.


Thank you !!

Jun 20, 2010 | Whirlpool AWOE8748 Front Load Washer

1 Answer

How to fix the F13 error in this stove


F11, 12 & 13) Disconnect power, wait 30 seconds and reapply
power. If fault returns upon power-up, replace EOC.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Apr 15, 2010 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Frigidaire CPL-EF398DCK


If unplugging doesn't reset it, then EOC electronic oven control is most likely defective

Nov 15, 2017 | Frigidaire fes365e Electric Kitchen Range

1 Answer

My kenmore elite electric slide in range displayed error and F13 and the oven won't turn on


i phoned Sears about error code f13 on a gas range, and was told to unplug the range for 30 minutes. i think she meant 30 seconds - to reprogram the microchip. i unplugged it for 15 minutes or so, then reconnected, and it worked.

Jul 09, 2008 | Kitchen Ranges

1 Answer

Machine fault code "f13"


Plug off the wall. There is a thin rubber tube going from the switch area to the exit near the outlet tube. Probably this is blocked. This tube should be free from any blockage; take out the top clip from this tube and blow into it - it should be free, clear the blockage if any and refit. This is the water level tube which tells the machine when to switch off water, etc.....

Sep 02, 2007 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Washing Machines Logo

3,369 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Harjeet Singh

Level 2 Expert

109 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...