Question about Kyocera Copystar CS-1820 Black and White Copier

1 Answer

Display the Call service C6400 code - Kyocera Copystar CS-1820 Black and White Copier

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 200 Answers

C6400 is a fixing unit error. You may need a new fixing unit but most of the time it can be reset in maintenance mode.

Use the following steps to enter the maintence mode, once there follow the steps for maintence mode 163 (reset fuser error). Do not do anything else in the maintenance mode area because you could damage your machine

Press the system menu/counter key.

Select Service setting using the up/down cursor keys.

While pressing the start key and the # key, press the enter key.


Select Maintenance mode using the up/down cursor keys.


Press the enter key.

Enter the maintenance item number (163) using the up/down keys.


Press the enter key.

1. Press the enter key. A selection item appears.


2. Select Execute using the up/down cursor keys.


3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020, C6050, and C6400 are reset.)

Completion


Press the back key. The indication for selecting a maintenance item No. appears.

Turning power switch off and back on



Resetting the fusing problem data

Description

Resets the detection of a service call code indicating a problem in the fusing section.

When a service call concerning the fusing section occurs, turn the power switch off and open the front cover.

Then, turn the power switch on and press the system menu/counter key to enter the maintenance mode.

Purpose

To prevent accidents due to an abnormally high fusing temperature.

Method

1. Press the enter key. A selection item appears.

2. Select Execute using the up/down cursor keys.

3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020,

C6050, and C6400 are reset.)

Completion
Press the back key. The indication for selecting a maintenance item No. appears.

Turning power switch off and back on.

I hope this is helpful,
Shawn



Posted on Feb 27, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How can I fix the error c6400 on kyocera taskalfa 221?


Hi
I found this explanation of your error, although my understanding of it is not entirely clear.
Code: C6400
Description: Zero-cross signal error
Interrupt of the zero-cross signal does not occur more than 1 s.
Causes: Poor contact in the connector terminals.
Defective power source PWB.
Defective engine PWB
You can find this here:
Error Codes Kyocera Mita TASKalfa 221 Code C6400
and also by changing the drop down menus along the top of the page you can view other errors for your machine and for other models and makes. You can also use the link to get a Service Manual for your machine.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Dec 17, 2014 | Kyocera Office Equipment & Supplies

1 Answer

HOW I CAN FIX THE ERROR CODE C6400


heater problem press10871087 after press 163 reast

May 09, 2014 | Kyocera Mita KM-2050 Printer

1 Answer

Error code C6400


check your fuser unit thermistor or thermostat or lamp as the following digita 1087 1087 and put 163

May 09, 2014 | Kyocera Mita KM-2050 Printer

1 Answer

ADD TONER ERROR


Good day, if your error is toner then make sure the small white gears on the back of the toner cartridge is turning, if they are not then replace toner bottle, if they are turning ask a technician to test the toner motor. If your machine displays error C6400 then enter service mode by pressing 10871087, now press 163 and OK, now restart your machine, if the code is still there then you should replace your fuser/fixing unit.

Apr 03, 2014 | Kyocera TASKalfa 180 Copier

1 Answer

Kyocera FS1118, error code C6400, how do I resolve This?


Hi

Error C6400 appears in Kyocera FS118 when Zero crossing signal problem occurs i.e when the engine PWB doesnt detect the zero crossing signal. This can occur due to --

#1 Poor contact in the connector terminals.
#2 Defective power supply PWB.
#3 Defective engine PWB.

To reset it from Mainatince mode turn the power switch off and open the front cover. Now, turn the power switch on and press the system menu/counter key to enter the maintenance mode.

1. Press the enter key. A selection item appears.
2. Select Execute using the up/down cursor keys.
3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020,
C6050, and C6400 are reset.)
4. After this is complete press the back key. The indication for selecting a maintenance item No. appears.

Daniel Scott

Jun 21, 2010 | Kyocera FS-1118 Printer

1 Answer

Call service c6400


it is the problem fuser unite heater lamp or thermostater

Jul 14, 2009 | Kyocera FS-1118MFP Laser Printer

3 Answers

Showing 'error occured call service person c6400'


Defective power supply board. or Defective engine board

May 31, 2009 | Kyocera FS-1118MFP Laser Printer

2 Answers

C6400 error code km1635


you have a fuser problem, burnt out heater lamp needs to be replaced. call service representative for parts

Mar 17, 2009 | Office Equipment & Supplies

3 Answers

SOLVING ERROR CODES


i have problem in my copy machin kyocera fs-1118  this problem is erreur c6400

Sep 29, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Kyocera Copystar CS-1820 Black and White Copier Logo

1,924 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

gggg

Level 3 Expert

904 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...