Question about Lexmark X7170 All-In-One InkJet Printer

Open Question

My printer keeps saying 'the printer is paused"..

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 89 Answers

SOURCE: Printer keeps pausing itself!!

By UI do you mean RUI (Remote User Interface)? Have you installed a network kit? If so did you upgrade firmware using SST? If not, you need to do this or printing won't work.

In service mode. Copier > Display > Version > PS/PCL there needs to be a number e.g. 30.06. If there is no number the copier does not have any print drivers on it and won't be able to print. You also need to have a N BOOT-ROM (included in network kit). There Should be a N next to the number for BOOT-ROM under Copier > Display > Version if a N BOOT-ROM is installed.

Posted on Jul 17, 2009

Ad
  • 151 Answers

SOURCE: kodak printer 3 in1 says its paused when i try to print from pc

Basically the problem is caused by the printer spooler which is a printer system file that was installed on windows XP
For this problem kindly try doing the ff:

  • click START then select RUN
  • Type net stop spooler
  • click START then select RUN
  • Type net start spooler
  • Then try printing
  • if problem still persist call 1800 421 6699
Hope this will help

Thanks
Byron

Posted on Sep 01, 2009

  • 330 Answers

SOURCE: lq2180 when print few lines, the printer pause

its may be heaving problem with the control panel clean replace the buttons or replace the control panel and check it ................

Posted on Dec 22, 2009

  • 126 Answers

SOURCE: printer keeps saying "out of

check paper sensor in the tray, maybe its broken

Posted on Jan 08, 2011

printmastert
  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: keeps pausing job won't print. also won't

    Your firewall could be blocking some printer communications. Make sure to allow full access to all Lexmark and printer communications in the program rules/permissions for your firewall. For more information on how to configure the settings for your firewall, visit the Lexmark website at http://bit.ly/iNwkNs.

    Posted on May 31, 2011

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Printer is paused all the time


    Hello, sounds like your drivers are messed up, reload them to the computer or the connection cable maybe bad. If neither of these fix then the printer is bad.

    Sep 05, 2012 | Canon PIXMA MX870 Wireless Office...

    1 Answer

    My printer status says it is on pause and it won't print. How do I get it off of pause?


    I'm assuming that you're using a Mac. Try to uninstall the Lexmark driver first then download an updated driver online: http://bit.ly/McHL54

    If it doesn't work, try to reset the printing system:

    1. Open System Preferences and click "Print & Fax". Then click or right-click on the blank space around the list of printers on the left-hand side.

    You should see a pop-up menu and the option to "Reset printing system...". Once you select the option, the OS will restore the CUPS printing system back to its original default settings. NOTE: This will, of course, erase all of your print queues.

    Then add a print queue manually: http://bit.ly/SxD5Za

    Aug 08, 2012 | Lexmark 90T9105 - Pro 901 All-in-1

    1 Answer

    Keeps saying printer is "offline", but still


    Contact the printer customer service, they may need to install an updated driver (especially if the printer is a Lexmark).

    Aug 24, 2011 | Apple MacBook Pro MB991LL/A 13.3-Inch...

    1 Answer

    After each print the pause button will continue to blink and will not print another label. I have to manually open the print head, close it and press pause for it to print. I do not understand the...


    The ribbon is the transfer rolls same thing.
    But check if you have not activate the pause mode in your driver!
    This is an option to have the printer pause after printing

    Aug 04, 2011 | Zebra Z4M Printer

    1 Answer

    Keeps pausing job won't print. also won't scan... "can't load application" scans only to flashdrive.


    Your firewall could be blocking some printer communications. Make sure to allow full access to all Lexmark and printer communications in the program rules/permissions for your firewall. For more information on how to configure the settings for your firewall, visit the Lexmark website at http://bit.ly/iNwkNs.

    May 14, 2011 | Lexmark X4650 InkJet Printer

    1 Answer

    Hi, I'm not able to print on my hp 1320 printer. When I go to the print option I notice a word "paused" under the printer icon. I opened each tap on the properties and there is nothing that...


    Hi,
    Go to printers, right-click your HP 1320 and choose "Continue".
    The printer should change the status to ready after printing the remaining print job in memory.
    Hope i was of any help. If so, please rate me.
    Thank you.

    Pcsimples

    Mar 20, 2011 | HP LaserJet 1320n Printer

    1 Answer

    I have downloaded the driver and it all says it's good to go, but when I hit "print" it sends it to the printer and it says "Printer ready" but the status says "stopped" and...


    make sure when you hit print and the dialog box comes up...make sure that the PRINTER is highlighted not the fax, scanner,copier or office etc...I had the same problem when I first got mine.. its a great machine also check that the printer is set as your default printer.. youll see a check and default next to the printer name in the printers folder.. and make sure your not all jammed up with pages to print open the printer folder (usuall in your startup in the bottom ri side where your start up items go.. if you have any questions email me back good luck

    PS worst u have to do is delete the entire printer/fax etc set up and run the disc again. peace out

    Feb 03, 2011 | HP J3680 Officejet All In One Printer

    2 Answers

    Kodak printer 3 in1 says its paused when i try to print from pc


    Basically the problem is caused by the printer spooler which is a printer system file that was installed on windows XP
    For this problem kindly try doing the ff:

    • click START then select RUN
    • Type net stop spooler
    • click START then select RUN
    • Type net start spooler
    • Then try printing
    • if problem still persist call 1800 421 6699
    Hope this will help

    Thanks
    Byron

    Aug 28, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...

    Not finding what you are looking for?
    Lexmark X7170 All-In-One InkJet Printer Logo

    Related Topics:

    214 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lexmark Office Equipment & Supplies Experts

    Clive
    Clive

    Level 3 Expert

    4345 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Thomas F. Schneider

    Level 3 Expert

    2715 Answers

    Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...