Question about Ariston Technologies Washing Machines

3 Answers

My washing machine (model AQXL 95) will not go onto spin mode and I cannot open the door - I have a duvet inside and it will get to the spin mode and then stop. I have tried switching it on/off, tried different wash cycles and nothing helps! I am hoping you can give me some advice! lorraine

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ariston Tech... Master
  • 10,322 Answers

Wont spin if hasn't drained check pump

Posted on Jun 15, 2018

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ariston Tech... Master
  • 1,234 Answers

Lorraine,
If you unplug the power wait 60 seconds or so then plug back in.
you should be able to open the door and hopefully it'll reset it for you to factory setting.

Posted on Feb 03, 2018

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 293 Answers

When I wash heavy stuff it will not spin properly because the weight is not distributed evenly over the load and it stops every time. you may need a repair man unless you can just move the dial to a drain spot rather than spin, if enough water gets out it will probably open then.

Posted on Feb 03, 2018

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: Door jammed

take the top off the machine,put your hand down to the reigon of the door lock and by using a small screw driver the catch on the door can be forced open without doing any damage.

Posted on Jul 19, 2007

Master_Tech
  • 770 Answers

SOURCE: Washing Machine Door won't open

did that work?? you may have a bad or stuck door lock

Posted on Jan 24, 2008

  • 1294 Answers

SOURCE: Gorenje WA1541 Washing machine

Check your exit hose spigot, it may be clogged. This is if your filter is all clean. There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.

And pl rate me if helped.................

Posted on Jan 24, 2008

  • 1 Answer

SOURCE: Washing Machine Door won't open

I had the same problem. I went through all the steps on this thread to no avail. Finaly I just pryed the thing open - with no damage, thank goodness.

Once open I saw that the latch in the door didn't move when I pulled the handle. The problem it seems was in the latch on the door itself. If you end up this problem and want to get wet clothes out, just stick a flat-head screwdriver, behind the door latch into the horseshoe-shaped metal bit and lever it open - no prying necessary.

Not sure how I'm going to fix this permantely but at least I got my wet clothes out and can do laundry as long as I keep the screwdriver near by.

To fix - I'll either need to figure out how to disassemble the door and replace the latch mechanism, or just buy a whole new door.

Posted on Sep 21, 2008

  • 135 Answers

SOURCE: bosch washing machine won't drain and the door won't open.

Sounds like you have a blocked pump.To empty the machine manually lower the drain hose into a bowl or bucket.Once emptied the door should open.On most modern machines there will be a filter behind the kick plate at bottom front of machine, Check this for any foreign objects then try a spin before putting on again.If problem persists come for further options.

Posted on Nov 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint Futura HF8B593 keeps leaving a dirty residue, brown slimy in consistency over the washing. The machine isn't overloaded, I.e. Just duvet cover in there. Help I have had enough


Wash out tub with bleach,fill a cup of of bleach and let washer run thru all cycles.After it shuts off ,leave door open to avoid mold from growing

May 07, 2017 | Hotpoint Washing Machines

2 Answers

Noisy spinning


First make sure that the load is balanced, if you are washing and spinning a dense load like trainers etc this can cause an imbalance. If you are washing a duvet cover or a pillowcase, make sure that the loose clothes washed with it haven't migrated inside the cover or case, this happens so easily. It is always worth checking that the support feet are all touching the ground when the washing machine is empty as this can cause excessive noise
hope this helpsKind regards ki

May 11, 2015 | Washing Machines

1 Answer

Why it doesn't spin


almost all washing machines have a special switch to turn off or don't let spin when door is open. If machine 'thinks' that door is open, won't spin. "" Danger, Will Roberson...Danger..."" If you don't know what U are doing, please get help. An open switch looks like door is open.The switch is INSIDE the body of washing machine, ON the door is a plastic piece that pushes the switch lever in. You have to place 'jumpers' across the contacts on switch,shorting switch and turning machine to spins cycle.

Feb 16, 2013 | Washing Machines

1 Answer

Stop halfway hygiene wash 90degree


Do you have power to the unit? Does the display light up?

Nov 28, 2012 | Washing Machines

1 Answer

Going through full wash as normal but won,t go onto rinse or spin mode?


Hi,
Most front load units must have two things, door must lock and must sense cold water for rinse. I would check the fill line for the cold water, if clogged with sand, it will not progress through cycle. If the unit doesn't drain it will not spin, is there water left inside the drum area?
I am here if you want more assistance

I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

Aug 28, 2011 | Bosch Exxcel WFX 2467 Front Load Washer

1 Answer

Sometimes it spins sometimes it doesn't had a problem this morning with a king size quilt, it came out soaking so I tried to spin it again & its still wet, I put in another load & then it...


Duvets/quilts are very heavy when wet, causing a very unbalanced load. If the machine could spin such a large uncentred (UK spelling!) mass it would shake itself to pieces, so all modern domestic washing machines have unbalanced load detection systems. In use these systems will vary the drum rotation to try and get the load evenly distributed before going into full spin, but if they can't then no spin occurs.

Very few domestic washing machines can take a duvet or quilt (certainly no front loader which I'm aware of, and only a few top loaders), and those which can fit them in are usually overloaded. There's nothing wrong with your machine, you just need to use a commercial launderette machine to wash and spin your duvet/quilts in future.

Feb 16, 2011 | Washing Machines

1 Answer

Model 27422300 Kenmore Washer doen't spin or Agitate


The lid switch may be defective. If it is, the washing machine doesn't spin. The switch is inside the washing machine main housing near the door frame. Often you have to raise or open the top or front of the washing machine to get to the switch. If it's defective, you need to replace it.

Jan 26, 2011 | Kenmore 22642 Top Load Washer

1 Answer

Washing machine won't spin dry . Its a whirlpool 2 speed 7 cycle heavy duty model


If this is a top load clothes washer, almost all units will not spin if the door is open during the cycle time when it should be spinning. If the door is closed, check if the door safety interlock is broken (on most washers, you will see a pin on the door pressing into a little depression)

If these things check out, you probably have a failed transmission deep inside the clothes washer. Fixing that is non-trivial.

Aug 20, 2009 | Whirlpool Washing Machines

2 Answers

Zanussi turbodry 1050


this may sound silly but check the waste outlet pump electrically, some models are wired up so if the pump fails the water will not enter the machine, this works on the theory that if it fills up it can not empty also check the solenoids for open circuit electrically, double check the water supply to the machine, it may have been fine but you could have kinked the pipe placing the machine back where it should go?

Oct 04, 2007 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Harjeet Singh

Level 2 Expert

109 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...