Question about Office Equipment & Supplies

2 Answers

My Canon MP270 printer shows the following error 5200 P08

Posted by on

  • Nhice Jan 31, 2013

    How To Reset MP 258 error 5200 Step 1 : The printer is off and plug the power cord. Step 2 : Press the button STOP / RESET and hold, then press and hold the POWER button Step 3 : POWER button still press, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed. Step 4 : Release both buttons simultaneously Step 5 : The printer will proceed in a while (a while), then the LCD panel will show the number zero (0) Step 6 : Computer will detect NEW DEVICE, Ignore it... Step 7 : Press the power button, then the printer will turn off Step 8 : Press the power button again, then the printer will be ready to use

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 89 Answers

P08 (Print head temperature rise error) : 6. P08 (Print head temperature rise error): thermalprint head temperature exceeds a threshold.
Replace the new cartridge print head and / or change a new logic board.

Posted on Jan 12, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

How To Reset MP 258 error 5200 Step 1 : The printer is off and plug the power cord. Step 2 : Press the button STOP / RESET and hold, then press and hold the POWER button Step 3 : POWER button still press, release the STOP / RESET, then press the STOP / RESET 2 times in a state of the power button is pressed. Step 4 : Release both buttons simultaneously Step 5 : The printer will proceed in a while (a while), then the LCD panel will show the number zero (0) Step 6 : Computer will detect NEW DEVICE, Ignore it... Step 7 : Press the power button, then the printer will turn off Step 8 : Press the power button again, then the printer will be ready to use

Posted on Jan 31, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not print. What does error 5200 indicate?


See: http://www.canon.co.uk/support/consumer_products/product_ranges/printers/pixma/error_codes/#5200
5200/P08 - Orange and green light blinking 8 times Description:

A service error has occurred.
Resolution:
  1. Turn off the printer.
  2. Disconnect the power cable.
  3. Open the printer cover.
  4. Check for any orange protective tape or white polystyrene and remove if necessary.
  5. Check that there are no foreign objects in the printer (such as a paper clip) and remove if necessary.
  6. Close the cover.
  7. Reconnect and turn on.
If the above solution has not resolved your error, please contact your nearest Canon authorised service facility using the link at the top of the page.

Jan 18, 2016 | Canon PIXMA MX340 Wireless Office...

1 Answer

Instead of printing error number 5200


Error 5200 and Error P08 are same.. Remove your catridge for few minutes and replace ...

Aug 26, 2011 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

Canon pixma mp272 printer. replaced black cartridge for the first time and now it wont print. getting error p08 on the printer and error 5200 on my laptop screen


Hello Hellen,
the error P08 is error for abnormal temperature in print head. Aa possible cause the ink cartridge is faulty and needs to be replaced.The same error description is for 5200 on your PC.

I recommend that you try to replace ink cartrigde under warranty in store where you bought it. If after that you still have error, take the printer to the service center because they logic board ( pcb ) is faulty.

Hope that helps!

Aug 25, 2011 | Canon Pixma MP270 All-in-One InkJet...

1 Answer

Error 5200 or P08 on canon pixma mp495


The error indicates the following : Head overheating error.

Yes it is most likely the print head itself or at worst the logic board.

Replace head/logic board is the only answer.

Jul 11, 2011 | Canon PIXMA MP495 InkJet Printer

3 Answers

What is the meaning of the error code p08 error 5200 showing in the canon pixma 250 inkjet all in one?


Hello
This error is wasted ink full reset the printer press reset button and hold then press on relase and press twice reset button is now in maintenance mode to reset wasted pad ink press 4 times the reset button then turn the printer button on/off
Hope it helps, good luck

Dec 22, 2010 | Canon Pixma Mp250 Allinone Inkjet Photo...

2 Answers

I'm using canon MP276 printer and i jz refilled my cartridge, but it shows error 5200 and doesnt print anymore. Please help


Read the thread "Canon pixma mp270 printer error 5200?" @ Link

Download the "Resetter"-Service Tools @ HotFile

Hope it helps.

Nov 12, 2010 | Computers & Internet

1 Answer

Canon mp 270 error 5200 p08


The following tutorial on youtube.com helped me to fix this problem:
http://www.youtube.com/watch?v=RoiBaXVhS7g&feature=related

Sep 12, 2010 | Office Equipment & Supplies

3 Answers

I have canon mp 258 with error e27 how would i resolve it?


Canon error e27 ink absorber full/reset process

printer powered off but connected on power source , you must:
1. Press & hold stop/reset button, and then press & hold [ON/OFF] button.

2. When Green power lit, leave stop/reset button & press twice stop/reset (see orange indicator).
3. Leave On/Off button. Printer in actually service mode.
4. Press stop/reset 4 times (see orange indicator) if not blink restart above process from top.
5. After press stop/reset 4 times successful press On/Off button 3 times. printer will off.
6. Press On/Off button.

Jul 10, 2010 | Canon Pixma Mp250 Allinone Inkjet Photo...

2 Answers

My canon mp258 show error code p08 ,,what to do


printer canon mp258 eror code 5200
or p08 warning in printer

Apr 12, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,873 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...