Question about HP OfficeJet 7410 All-In-One InkJet Printer

Open Question

HP Officejet 7413 (same as 7410) . i keep losing wireless connection to the router . Every time i want to use my wireless connection i have to turn the printer off and on again, Reset the network settings, Connect to my home wireless network with a WAP code, and then it stay connected for a few minutes and lose the connection again,. Does anyone have any solution for this annoying problem ???? Thanks,.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: HP OFFICEJET 7410 "NO SCAN OPTION"

1.open the HP Director/Solution Center 2.click on scan menu and go to destination list tab 3. on the left side u will find a list of available destinations , move them all to the right side (front panel destination list) and save and then try to scan again , IT MAY WORK

Posted on Jan 22, 2007

Ad
khanmohammad
  • 188 Answers

SOURCE: Printer is not working after changing the router

Hi Nagureddi,

Please click on the web link given below and perfrom the steps as given in the web page.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00805046&cc=us&lc=en&dlc=en&product=391194

Have a great day!

Posted on Mar 24, 2008

SOURCE: Service Manual for HP OfficeJet 7410

That was no good.

Posted on Jul 29, 2008

rickyostrom
  • 274 Answers

SOURCE: I have a J6400 all

If your router is set not to broadcast or has encryption enabled, you will first have to program the printer by software throught a USB cable, or at the panel on the printer. The printer manual should explain how.

If you need a copy of the manual or other support, it's at this link. Just select your exact printer model and operating system first.
J6400 Printers Support

Posted on Nov 24, 2008

  • 47 Answers

SOURCE: Does HP LJ 3055 printer scan over the wireless network?

Scan over wireless network is not supported with this printer. You can try set it up and get scanner to work with usb and then change port from usb to HP standard TCP/IP for the device, but I don't think it will work.

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it keep loosing Wi-Fi connection?


I

is your wireless connection dropping? - We Rock Your Web

www.werockyourweb.com > Tech > Troubleshooting
Jun 22, 2014 - The symptoms are a wireless connection that literally will drop out .... the 5th router is wireless CPE AP, wifi signal keep droppings all the time I ...

WiFi problems! Keep losing connection! - Tom's Hardware

www.tomshardware.com/.../wifi-problems-losing-...

Tom's Hardware Guide
Nov 15, 2015 - 9 posts - ‎5 authors
Ok so for some reason ever since we got a new modem and router my HP laptop willhave a full connection and all of a sudden ill lose it and my wifi says "No Networks available" and a red X appears by my bars at the bottom. ... I dont know if maybe my network adapter is going bad or ...

A fix for my Windows 8


Jan 04, 2016 | Tablets & eReaders

1 Answer

How to connect hp officejet 4620 to my netgear cg814wg v2


First connect it via USB to a computer and set it up so it works over the cable.

Then re-install it to be wireless, putting in the router requirements.


Then under instructions unplug the router.

It should then be set up to run wirelessly.

Jan 13, 2014 | NetGear CG814WG 54 MBPS WIRELESS CABLE...

1 Answer

I purchased mu HP Officeject 6500 Wireless within the past 12 months. I have had multiple instances where the printer stops scanning and sometimes stops printing. My tech guyhas fixed it 4-5 times and it...


Might be a problem with the router, or router location. Check the signal strength from the printer.
If your signal only has 1 or 2 bars, it could lose its connection very easily.

You should be able to move your modem and router, anywhere in the house, and it will not erase settings. Just have to have a strong cable signal going to the modem.

If the signal strength is not the problem, your router could be getting hot and cutting out. Or getting old and going bad. Try also resetting the router and reconfiguring it.

May 03, 2011 | HP Officejet 6500 Wireless All-in-One...

2 Answers

How do I set up a wireless printer. I am on a wireless network now. How do I make my printer wireless??


The HP Officejet 7310 has an optional bluetooth wireless adapter. If you purchased the option, you will need bluetooth connectivity at your computer end. Alternatively, you could purchase a third party wireless adapter.
Other than that, you will need to connect your printer to your router/wireless network then all computers will be able to print wirelessly to it through the router.
Hope this helps.

Jan 22, 2011 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

Can not find printer on wireless network


I am pretty sure the HP J4680 is wireless only, at least I can't find any Ethernet ports on HP Officejet J4680 that are obvious. So first make sure the blue antennae light is on on the left side of the HP panel. If it is not on press the button that says 802.11g and the blue light will light up indicating that the wireless is now enabled. Check now and see if you can see the printer on the network. Power cycle the printer and router and then see if the printer shows up. If you think it is now connected you can go to step 9) below. if not go to the next step

If the above didn't work try and change the wireless settings from the front panel of the HP Officejet J4680. Press the setup button (the wrench) on the front panel, then scroll till you see Wireless Menu and press OK, then scroll till you see Setup Wizard and press OK. The printer will search for all the wireless routers it can find. It should display your wireless router SSID, this is the name of the router. When it shows you the name of the router press OK and it will display WPA Passphrase or WEP passphrase (depends on the security you have on your wireless router). If you see the SSID of your router this is a good thing, because it indicates that the wireless is working and just needs to be configured. Now type in the passphrase exactly (the same passphrase you use to connect your PC or Mac to the wireless internet) and press OK. It should connect to the wireless router. If this doesn't work, unplug and plug in the wireless router and the printer and try it again. If you think it is now connected to the wireless, then go to step 9) below. If the above doesn't work you can keep trying it but I haven't had much luck with the front panel method.

If the above fails to work, the next method to try is to connect a PC or Mac directly to the HP Officejet using the AD-HOC wireless method. I can't figure out how to get the HP printer into this AD-HOC mode unless I do a wireless reset of the values in the printer. There is prob a way to do this without a reset, but I couldn't get it. I would recommend you read through all the steps below before you do this. It will wipe out what you currently have setup in your printer. But these are the steps I just went through and I got my printer to connect to my MAC and work.

1) You might not have to do this step, but if all else fails reset the HP Officejet J4680 network by pressing the setup button (the wrench) go to Wireless Menu and Press OK then go to Reset Wireless select YES and press OK. If that doesn't work then there is another reset that I found in the setup menu (the wrench) under Tools and then Restore Defaults. I wound up doing both resets on my Officejet J4680

2) Power the HP Officejet off and on for good luck (again optional but might help).

3) Make sure the the wireless on the printer is enabled by pushing the button on the left side front under the 802.11g so that the blue wireless light turns on. (again optional, but make sure the blue antennae light is on)

4) Connect to the HP Officejet J4680 wireless printer directly from the MAC (this is pretty neat stuff) click on the Airport icon at the top bar of your mac screen, if you see the hpsetup listed then click on it, if it is not listed then click on join other network and type in hpsetup and click Join. This will join the mac to the Ad Hoc HPSetup network and you can now setup the printer from the mac!

5) Important: Print a network settings report on the HP Officejet by pressing the setup button again (the wrench) go to Print Report and press OK, go to Network config and press OK. If you try and print this before you connect (step 4) you will not get the info you need in the report, so connect first from Mac to HP then print this report.

6) fire up safari or Firefox or chrome browser on the Mac and type in the URL that is listed on the report you just printed out. It starts with http:// type in the http:// and the 4 numbers all together with no spaces into the address bar in your browser and press return.

7) you are now connected to the HP Officejet J4680 via the web browser interface. Click on Networking, then Advanced, click the infrastructure tab, type in the SSID of the wireless router (i.e. the name of the router you see when you try and wirelessly connect from a computer) and fill in the passphrase info for your router, type it again to confirm, then click apply.

8) The printer will change the connection from the Ad-Hoc network to the SSID of the wireless router. So you have to connect to the wireless printer, to do this on a MAC, you go to the top row of the mac and click the Airport icon, select the wireless router.

9) Now go to the spotlight icon (far right top row on the mac) type Print and then click on Print & FAX, if your printer is not listed, then click the + and add it. You should be able to check the supply levels on the HP, if you see the current time below the supply levels you are successfully connected. On a Windows system, you would go to control panel, then Printers and add your printer if it is not listed.

Also, below is a good video with even more detailed info:

10) Officejet J4680 setup via the mac using this very thorough guide: http://www.youtube.com/watch?v=Rjd1ZqJ89N4



edh 1-13-2011

Jan 07, 2011 | HP J4680 Office Jet All-In-One Printer

1 Answer

HP Officejet 6500 a plus won't print. Every time I press print, it says incorrect paper size. What is wrong?


This is one of the common connectivity issues marring the benefits of having a wireless printer. In this situation your printer will not print when connected wirelessly but would need you to set it up with your system using a USB cable. Try resetting the IP of your system to what is mentioned in the printer and in case there is a router connecting your printer and system then use the IP address of router and put it in your system. This should help you fix this printer issues.

Nov 19, 2010 | HP Officejet 6500 Wireless All-in-One...

1 Answer

I have a Linksys router since 7/09 but keep losing


LOSING WIRELESS CONNECTION ?
Make sure the latest wireless card driver is installed in the computer.
Locate the wireless router higher and away from concrete and brick walls, foil insulated walls.
Locate the wireless router away from cordless phones and microwave ovens these can cause interference.
You could be getting interference from other wireless access points or wireless routers in your area. Check the wireless broadcast channels in your area, and select one that is unused or one that has the weakest signal strength.

Jan 22, 2010 | Computers & Internet

2 Answers

HP Officejet Pro L7580 Wireless Connection


YOUR PRINTER IS NOT A WIRELESS PRINTER IT CAN BE USED USING AN ETHERNET CABLE TO THE PRINTER FROM THE ROUTER

STEPS
+++++++
SETUP>>NETWORK>>RESTORE NETWORK DEFAULTS

SETUP>>NETWORK >>WIRELESS RADIO>>ON

CONNECT THE ETHERNET CABLE FROM THE ROUTER TO THE BACK OF THE PRINTER.

SETUP>>NETWORK >>PRINT NETWORK CONFIGURATION PAGE

INSTALL THE PRINTER
SELECT WIRED CONNECTION
AND INSTALL
IT WILL PRINT.

OR IF YOU WANNA USE AS WIRELESS YOU CAN USE WPUK (WIRELESS PRINTING UPGRADE KIT)

FROM HP.COM HOPE IT FIXYA

Apr 25, 2009 | HP Officejet Pro L7580 All-In-One InkJet...

Not finding what you are looking for?
HP OfficeJet 7410 All-In-One InkJet Printer Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...