Question about Mitel 5224 IP Phone
Press and hold the up arrow.
Configure Phone - Yes
network parameters - yes
press no until you see "change" and press yes.
You will need to set the following appropriately.
IP address, Subnet address, default gateway, ICP controller address, TFTP address, VLAN ID, VLAN priority, DiffServe Value, DNS address.
Normally it is not necessary to set the phone static except for testing. If your network and DHCP server is set up properly, you are not gaining any benefit for setting it static.
Also, you should find out what the other IP addressess are that are static on the Voice subnet. Along with that, you will need to know the DHCP range. These are needed so you don't assign a duplicate IP address to your network. Assign the phone to the wrong device could do great harm to your network. Assign it to use the same IP address as the phone system and none of your phones will operate.
Use with caution,
Posted on Apr 04, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 18, 2013 | Mitel 5224 IP Phone
Jan 14, 2013 | Mitel 5224 IP Phone
Apr 19, 2012 | Mitel 5224 IP Phone
Feb 22, 2011 | Mitel 5224 IP Phone
Dec 22, 2010 | Mitel 5224 IP Phone
Dec 17, 2010 | Mitel 5224 IP Phone
Nov 09, 2010 | Mitel 5224 IP Phone
Nov 02, 2010 | Mitel 5224 IP Phone
Mar 04, 2010 | Mitel 5224 IP Phone
2,690 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: