Question about HP LaserJet P3005 Printer

1 Answer

Hp laserjet 3005 Problem : 49, 2f9d Error Power Off Then On Not able to continue the printing. please give me the solution for this problem.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 152 Answers

Hewlett Packard 49.XXXX Errors


I hope this will be of assistance to you, any repairs under taken are at the owners free will.


Hello, the dreaded 49.2F9D Error Turn Power On/Off and other related 49 Errors.


This tip relates to the Hewlett Packard P3005 Series Printer - General reference to most HP Laser Printers


There have been many reports of this error in the HP genre of laser printer. This is a generic fatal error; the root cause is undetermined in most cases. It could be related to an application "corrupt data" or faulty printer firmware, or the formatter board or other associated hardware or accessory. The first step in troubleshooting this error is to isolate the printer from any computer source - disconnect from any I/O ports, Network/USB etc... Power cycle the printer. Does the error still report? If NO then an application may be causing the error, try to isolate the file causing the problem. Clear any pending print jobs. If YES then Firmware/Formatter most are the problem. A new firmware file can be found here. P3005FIRMWARE


Pay close attention to PDF files with embedded JPEG files.


Pay close attention when printing Emails or Web Pages.


In rare circumstances the fuser has been reported to cause the 49.2F9D error. (P3005 specifically)


*** Further Reference Material MoreOn49Errors ***


Contact a local HP Authorized Service Center for further assistance.

Posted on Feb 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix sensor error on hp color laserjet 2600


54.06

Error message

54.06

Description

Color density sensor error

Action

  1. Power cycle the printer.
  2. Calibrate the printer. Click here to view the document "HP Color LaserJet 2600n - Calibrating the printer" available on the HP Web site at (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00314525).
  3. Change the Print Density settings through the HP Toolbox. Click here to view the document " HP Color LaserJet 2600n Printer - Change Device Print Settings in HP Toolbox" available on the HP Web site at (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00310627).
  4. If the problem continues, contact HP Customer Support Center for technical assistance athttp://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.

Apr 02, 2014 | HP Color LaserJet 2600n Printer

1 Answer

Printer hp laserjet 2420 error 41.2 dan error 68.2


Hi,

The 41.2 printer error means beam detect misprint error. To resolve this try the ff:

  1. Press c00099410.jpg (Select). The page containing the error automatically reprints if jam recovery is enabled.
  2. Turn the printer power off, and then turn on the printer power.
  3. If the message persists, click here to access the HP support Web site at http://www.hp.com/support/lj2300 ,
The error 68 regardless what number follows after it is about Storage Error. One or more printer settings saved to storage device x are invalid and have been reset to factor defaults. To resolve this:

Press c00099410.jpg (Select) to clear the error and continue printing. Printing can continue, but unexpected behavior might be experienced because an error occurred in permanent storage.

Hope this helps.

Thank you for using FixYa.

Nov 26, 2010 | HP LaserJet 2420 Printer

2 Answers

49,4c02 error to continue turn off then on


I would try clearing your print que as it could be a corrupt print job and disconnecting your network cable and reboot the printer, make sure you have the latest firmware. hope this helps

Nov 24, 2009 | HP LaserJet 4700 Printer

1 Answer

Printng error


Hi,
Please change the driver to UPD (http://www.hp.com/go/upd) to PCL5
This will solve the issue

Rgds,
Nikhil

Jun 14, 2009 | HP LaserJet 1320n Printer

1 Answer

PCL XL error


Hi,

Please uninstall the current PCL driver and upgrade the same with UPD PCL5 (dont install PCL6) from http://www.hp.com/go/upd

Regards,
Nikhil

Dec 16, 2008 | HP LaserJet 1320n Printer

3 Answers

Hp2300 laser printer


Hi,

52.x PRINTER ERROR alternates with To continue turn off then on Possible printer control panel error messages 52.0 PRINTER ERROR 52.1 PRINTER ERROR 52.2 PRINTER ERROR Description A temporary printing error occurred. The x can equal one of the following: 0 = Scanner error 1 = Scanner startup error 2 = Scanner rotation error This error can also indicate a problem with the shutter tab on the print cartridge. Action
  1. Turn the printer power off, and then turn on the printer power.
  2. If the message persists, check the print cartridge for damage.
    1. Verify if the shutter tab on the cartridge is broken or damaged. click on the below link. Shutter tab on the print cartridge
  3. 1 - Shutter Tab
  4. Replace the cartridge if damaged.
If the message continues to persist, then download the printer software based on operating system and reinstall.

HP Laser-Jet 2300d Printer Software


Regards
Chittaranjan

Dec 11, 2008 | HP LaserJet 2300d Printer

1 Answer

Laserjet Printer


if it seems like it wants to take the paper in on the first print but don't and then gives you the error message , then the paper feeder will need to be cleaned ( rubber grabing wheels)
if the error message comes on before it trys to grab paper , then there is an internal problem with the printer

if this helps you then please give a fixya rating and i will tell you how to clean the paper feeder rollers

electech

Nov 07, 2008 | HP LaserJet 1320 Printer

2 Answers

HP Laserjet 1320 Printer doesn't respond


Manual Feed or Continuable
Error
This state can be reached in
the following circumstances:
● Manual feed
● Out of paper for the
specified tray
● General continuable error
● Memory configuration error
● Personality/Job related
error

Solution
To recover from the error and
print whatever data is possible,
press the GO button.
If the recovery is successful,
the printer goes to the
Processing Data state and
completes the job.
If the recovery is unsuccessful,
the printer returns to the
Continuable Error state.

Feb 05, 2008 | HP LaserJet 1320 Printer

Not finding what you are looking for?
HP LaserJet P3005 Printer Logo

1,560 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...