Question about Brother HL 1240 Printer
Service manual: ready and alarm blinking : If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response Thanks, Joe
Clear the paper jam and press the panel button if the printer
does not automatically resume printing.
Re-install the paper and press the panel button.
Clear the jammed paper inside the printer. Press the panel button
if the printer does not automatically resume printing.
check the sensors:
1) Turn off the printer power switch, open the front cover, and remove the drum unit.
2) Turn on the printer while pressing the control panel button. The Drum LED comes ON.
3) Lightly press the panel button again.
Alarm LED is ON = Front registration sensor is turned ON.
4) Press and release the panel button again.
Drum LED is ON = Paper eject sensor is turned ON.
If sensors are On, paper is being detected, Off- no paper
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response
Posted on Feb 21, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 11, 2016 | OKI Office Equipment & Supplies
Sep 15, 2008 | Office Equipment & Supplies
Nov 28, 2011 | Brother HL 1440 Laser Printer
Dec 09, 2009 | Brother HL 1440 Laser Printer
May 30, 2009 | Brother HL 1440 Laser Printer
Sep 06, 2008 | Brother HL 1240 Printer
Apr 21, 2008 | Brother HL 1440 Laser Printer
Apr 05, 2017 | Brother HL 1240 Printer
284 people viewed this question
Usually answered in minutes!