Question about Canon ImageRunner 2020i Copier

3 Answers

Sir I have Canon IR 2870 a few weeks later machine shown Error 000007-000. I changed the fixing film but machine showing error again why

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Sir I have canon 2870 machine. The machine giving the finisher problems, when starting the finisher going down. The machine showing the problem E540. Please kindly solve

Posted on Jun 09, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 75 Answers

Clean the white mark reader in the fixing unit and check the harness of the fixing unit.

Posted on Jun 28, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,219 Answers

Hi, check/reconnect the sensor above the fixing assy, or change sensor.

Posted on Feb 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Clear Error- 000716-0010 in Canon IR2870 Copier?


E716 - There is an error in the communication with the pedestal.
After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec.
1. Check the cable. Replace the DC controller
2. PCB. Replace the pedestal drive PCB.

http://www.smoothprinterservice.com/
25124740-bikywzvwoesmw0qymyxjzr1b-4-0.jpg

Sep 22, 2014 | Canon Ink Cartridge GPR15 for iR 2270, iR...

1 Answer

How do I solve Error Code - E000716-0010 In Canon IR2870


Failure of the communication with the 2-way unit
Description
When the communication with the 2-way unit is faulty after detecting the connection with the finisher.
Remedy
1.Install the 2-way unit.
2.Check the cable.
3.Replace the DC Controller PCB (PCB4).
4.Replace the 2-way unit driver PCB.

Sep 22, 2014 | Canon Ink Cartridge GPR15 for iR 2270, iR...

1 Answer

2870 canon copier machine showing error code E000024-0001


remove your doveloper unit and check sensor, it is luse or re fix again ,........

Sep 24, 2013 | Canon Ink Cartridge GPR15 for iR 2270, iR...

1 Answer

May canon ir 2870 eror code below E000732-0010


sir ihave ir 2870 mashine . the machine giving E000225 -001 error code

Oct 25, 2012 | Canon imageRUNNER 2870 Copier

12 Answers

E000000-0001


Okay, to be of real help you have to reset the error in service mode as the officetech1 said. To do this you need to press the head key (the head with the star inside) then 2+8 together and then the head key again. This will get you into service mode. Then select 'COPIER' then 'FUNCTION' then 'CLEAR' then select 'ERROR' or 'ERR' press 'OK' then switch the machine off and on again. This may get it working for a while or a long time. But if not, you will need a fixing film unit to remedy the problem.

Mar 10, 2009 | Canon imageRUNNER 4570 Copier

5 Answers

Canon iR-2016 System erro E007


The erreor code E007 has to do with the fixing ***'y upper film ***'y or roller. It is saying that the film is not moving in and out of "HP" Most of the time it means that the fusing film is torn and not moving properly. If you are getting paper jams in the fusing area and or unfixed or smeared copies. You most likly need to have the fusing film ***'y replaced. It could also be that it is out of place and needs to be readjusted. The only problem is that it's a little tricky to get to and not a bad idea to have a new film to replace the old one while you have it out. Good Luck

Mar 15, 2008 | Office Equipment & Supplies

6 Answers

Canon iR-2016 System erro E007


hi how do solve this problem system error E007

Dec 04, 2007 | Canon CLC 1140 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2250 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...