Question about HP Photosmart C7280 Printer

1 Answer

HP C7280 printer: "Pump motor stalled" error

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 66 Answers

This means there's a failure in your printer's pump motor.
If you are still under warranty, contact HP's Customer Service here : http://welcome.hp.com/country/us/en/wwcontact_us.html
If not, you can try your local computer store for a check-up but they'll probably suggest a new printer.
Hope this helped.
Please rate :)

Posted on Mar 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pump motor stalls in my HP printer


When an inkjet printer is making "awful noises" it means that there is either a paper jam or the carriage can't move properly. Remove all paper and check for a paper jam - if this is not the problem, turn off the printer and see if you can move the print cartridge carrier by hand. If it is hard to move, clean the shiny carriage rod with a cloth and put just a drop of light oil on it. Move the carriage back and forth and clean it again - repeat until it moves easily and add a final drop of oil to the rod.

Oct 14, 2014 | HP Photosmart C7280 All-in-One Printer

1 Answer

HP C6280 will not print self test diagnostic


Do you have an Anti-Virus program installed on your PC? If so, can you try and disable it before you print.

for more help visit CBR Tech Solutions

Mar 13, 2013 | HP C6280 All-in-One Printer

2 Answers

Hi...I have a problem with my HP Photosmart C7280...can you help ? the error message "Photo tray problem" keeps coming up, telling me to "lift the output tray, push the photo tray all the...


Photo tray problem

' Lift the output tray up and verify that the photo tray

' is pushed in until it stops, then lower output all the

' way down. Press OK button on the printer to

'continue printing

HP Photosmart C7280 All-in-One Printer


1. Turn off printer.

2. Pull out paper tray and photo tray

3. Remove output duplexer (on back of printer)

4. Open input sheet feeder (on top of printer)

5. Open cartridge access door. (Basically lift up control panel and scanner section of the printer)

6. Turn on printer (Power button on now raised control panel)

7. Printer may display message "Performing printer alignment - Do not interrupt"

8. Wait for a few minutes until printer stops making all setup noises.

9. Close cartridge access door, close input sheet feeder, replace output duplexer, insert paper trays

10. Do a test print. All should be fine.

Mar 11, 2011 | Office Equipment & Supplies

1 Answer

My printer has a "Pump Motor Stalled " message. It


Hello. First of all you have to "Reset the printer" to factory default. To do this, you have to press and hold # & 6 at the same after you push the "Power" button. Hold the # & 6 keys till to see the power led blinking. The printer will reset to defaults and give it 1-2 minutes to warm up and prepare its software. After this check if your printer is working properly. If not, open the access door and check if there is a paper jam inside(left or right) behind the cartridges. If not again, buy a Blower( a machine that blows air with a lot of power) and use it to clean the interior of your printer. After this buy some lubricant and insert it with attension where you see cogwheels. After all those things your printer will work without any problem.

Feb 07, 2011 | HP Photosmart C7280 Laser Printer

1 Answer

My C7280 is printing at an angle


You could try the recommendations from HP support for your model: (recommend cleaning feed rollers)

HP Photosmart C7280 Prints Crooked

Jan 07, 2010 | HP Photosmart C7280 Printer

2 Answers

HP C7280 doesn't print 2-side from my computer


have you use duplex unit?
you have to change your driver option both side print

Thanks

Oct 27, 2009 | HP Photosmart C7280 Printer

Not finding what you are looking for?
HP Photosmart C7280 Printer Logo

2,339 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...