Question about Texas Instruments TI-83 Plus Calculator

Ad

In order to give the calculator a function to graph, you will want to enter the y= window by pressing the top left most button on the calculator.
a menu similar to the one above will open, wherein you can enter an equation for the calculator to graph, such as (x^2-2). On the ti-83 itself, you can enter up to 9 equations to be graphed at once. after that, you may want to go to the window menu, where you can set the dimensions of the graphing plane in both the x row and y column. to view the graph, press the top right most button on the device.

hope that helps :)

Posted on Apr 01, 2011

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

At first, in **menu** choose **settings** and set on **Graphing Angle** option to **Radian**. Then graph function. See captured image

Aug 15, 2013 | Texas Instruments TI-Nspire CX Graphing...

Turn calculator ON

If you see no icons, press Menu

Press 3 (Graph) draw your function. (more on that later).

If the first line of the display show Graph Func : Y= you should be able to draw your function.

If it says anything else, press F3 TYPE to select the graph type and select functional by pressing F1 key Y=.

After the graph type is set to Y=, type the second member of your function y= f(x) on the first line. Make sure the = sign after Y1= remains highlighted after you move cursor. Otherwise select the function by pressing F1:SEL. Press F6 Draw.

Be careful with trigonometric functions. If angle unit is radian, set window Zoom to standard. If angle unit is degree, you must open the Window utility and set Xmin=-190, Xmax = 190 to see at least a period.

If you see no icons, press Menu

Press 3 (Graph) draw your function. (more on that later).

If the first line of the display show Graph Func : Y= you should be able to draw your function.

If it says anything else, press F3 TYPE to select the graph type and select functional by pressing F1 key Y=.

After the graph type is set to Y=, type the second member of your function y= f(x) on the first line. Make sure the = sign after Y1= remains highlighted after you move cursor. Otherwise select the function by pressing F1:SEL. Press F6 Draw.

Be careful with trigonometric functions. If angle unit is radian, set window Zoom to standard. If angle unit is degree, you must open the Window utility and set Xmin=-190, Xmax = 190 to see at least a period.

Feb 21, 2013 | Casio CE CASI FX-9750GII-L-IH GRAPHING...

If the angle unit is set to degrees and you use the standard window dimensions (Xmin=-10, Xmax=10) then all you will see is a straight line: Between 0 and 10 degrees, the sine is approximately equal to 0 and the cosine is about 1.

To see the features of the trigonometric functions you must do one of the following

To see the features of the trigonometric functions you must do one of the following

- Set angle to degree but set window dimensions to span the domain -180 to 180 or larger.
- Set windows dimensions to the standard -10, 10 range but set angle degree to radians

May 12, 2012 | Texas Instruments TI-84 Plus Calculator

Make sure you have the angular mode set to radians. In degree, the graph of sine(x) is nearly a straight line for small values of x.

May 08, 2012 | Texas Instruments TI-Nspire CAS Graphing...

The fact that you are asking how to graph makes believe that you solved the problem about 'invalid dimension' . I am glad that worked for you.

This should help you setup your calculator to do graphing.

1. Prepare calculator for graphing Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

2. Setup Graph type

3. Entering the functions to draw (assuming you want to draw y= functions)

4. Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

5. Drawing the Graphs

6. ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

This should help you setup your calculator to do graphing.

1. Prepare calculator for graphing Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

2. Setup Graph type

- Press [MODE] key.
- In Mode set up screen, make set the angle unit (if you are drawing trigonometric functions)..
- Use the arrows to move cursor to 3rd line to highlight
degree or radian and press [ENTER]. The important thing is that you be
aware of the unit so that you do not get unexpected results.
- On same screen, verify that
**Func**is highlighted. If you are drawing PARametric plots, POLar plots or SEQuence plots, you highlight the relevant item in the list - If it is not, use arrow to highlight Func and press [ENTER] to validate.
- Do not worry if you do not have exactly the same screen
as in the screen picture (We may have different OS Versions)

3. Entering the functions to draw (assuming you want to draw y= functions)

- Press [Y=] to enter function editor.
- Type in a function
- Press [ENTER] at the end of each function.
- Before pressing [GRAPH], make sure that all the = signs that define the functions to be graphed are highlighted white on black. If one is not highlighted, use arrow to move cursor on the sign and press [ENTER].
- In the screen capture 4 functions are slated to be
drawn.

4. Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

- Select the graph style:
The small piece of line to the left of a Y that defines a function is
the style.
- Move cursor on it and press [ENTER] .
- Each [ENTER] (on same line) selects another style.
- On the next screen you have all the styles available on the calculator.
- Do not select the bubble on line 6: It is for
animations. It will not leave a trace at the end of the plot.

5. Drawing the Graphs

- Press [GRAPH] to see the graphs.
- If one of them is missing, verify that its = is still highlighted, then use the [WINDOW] to set the Window dimensions,
- Here are the dimensions of the standard window

6. ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Sep 08, 2010 | Texas Instruments TI-84 Plus Silver...

This should help you setup your calculator to do graphing.

1. Prepare calculator for graphing Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

2. Setup Graph type

3. Entering the functions to draw (assuming you want to draw y= functions)

4. Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

5. Drawing the Graphs

6. ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

1. Prepare calculator for graphing Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

2. Setup Graph type

- Press [MODE] key.
- In Mode set up screen, make set the angle unit (if you are drawing trigonometric functions)..
- Use the arrows to move cursor to 3rd line to highlight
degree or radian and press [ENTER]. The important thing is that you be
aware of the unit so that you do not get unexpected results.
- On same screen, verify that
**Func**is highlighted. If you are drawing PARametric plots, POLar plots or SEQuence plots, you highlight the relevant item in the list - If it is not, use arrow to highlight Func and press [ENTER] to validate.
- Do not worry if you do not have exactly the same screen
as in the screen picture (We may have different OS Versions)

3. Entering the functions to draw (assuming you want to draw y= functions)

- Press [Y=] to enter function editor.
- Type in a function
- Press [ENTER] at the end of each function.
- Before pressing [GRAPH], make sure that all the = signs that define the functions to be graphed are highlighted white on black. If one is not highlighted, use arrow to move cursor on the sign and press [ENTER].
- In the screen capture 4 functions are slated to be
drawn.

4. Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

- Select the graph style:
The small piece of line to the left of a Y that defines a function is
the style.
- Move cursor on it and press [ENTER] .
- Each [ENTER] (on same line) selects another style.
- On the next screen you have all the styles available on the calculator.
- Do not select the bubble on line 6: It is for
animations. It will not leave a trace at the end of the plot.

5. Drawing the Graphs

- Press [GRAPH] to see the graphs.
- If one of them is missing, verify that its = is still highlighted, then use the [WINDOW] to set the Window dimensions,
- Here are the dimensions of the standard window

6. ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Sep 03, 2010 | Texas Instruments TI-83 Plus Calculator

This should help you setup your calculator to do graphing.

Prepare calculator to graph

Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

Setup Graph type

Entering the functions to draw (assuming you want to draw y= functions)

Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

Drawing the Graphs

ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Prepare calculator to graph

Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

Setup Graph type

- Press [MODE] key.
- In Mode set up screen, make set the angle unit (if you are drawing trigonometric functions)..
- Use the arrows to move cursor to 3rd line to highlight
degree or radian and press [ENTER]. The important thing is that you be
aware of the unit so that you do not get unexpected results.
- On same screen, verify that
**Func**is highlighted. If you are drawing PARametric plots, POLar plots or SEQuence plots, you highlight the relevant item in the list - If it is not, use arrow to highlight Func and press [ENTER] to validate.
- Do not worry if you do not have exactly the same screen
as in the screen picture (We may have different OS Versions)

Entering the functions to draw (assuming you want to draw y= functions)

- Press [Y=] to enter function editor.
- Type in a function
- Press [ENTER] at the end of each function.
- Before pressing [GRAPH], make sure that all the = signs that define the functions to be graphed are highlighted white on black. If one is not highlighted, use arrow to move cursor on the sign and press [ENTER].
- In the screen capture 4 functions are slated to be
drawn.

Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

- Select the graph style:
The small piece of line to the left of a Y that defines a function is
the style.
- Move cursor on it and press [ENTER] .
- Each [ENTER] (on same line) selects another style.
- On the next screen you have all the styles available on the calculator.
- Do not select the bubble on line 6: It is for
animations. It will not leave a trace at the end of the plot.

Drawing the Graphs

- Press [GRAPH] to see the graphs.
- If one of them is missing, verify that its = is still highlighted, then use the [WINDOW] to set the Window dimensions,
- Here are the dimensions of the standard window

ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

May 19, 2010 | Texas Instruments TI-83 Plus Silver...

This should help you setup your calculator to do graphing.

Prepare calculator to graph

Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

Setup Graph type

Entering the functions to draw (assuming you want to draw y= functions)

Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

Drawing the Graphs

ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Prepare calculator to graph

Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

Setup Graph type

- Press [MODE] key.
- In Mode set up screen, make set the angle unit (if you are drawing trigonometric functions)..
- Use the arrows to move cursor to 3rd line to highlight
degree or radian and press [ENTER]. The important thing is that you be
aware of the unit so that you do not get unexpected results.
- On same screen, verify that
**Func**is highlighted. If you are drawing PARametric plots, POLar plots or SEQuence plots, you highlight the relevant item in the list - If it is not, use arrow to highlight Func and press [ENTER] to validate.
- Do not worry if you do not have exactly the same screen
as in the screen picture (We may have different OS Versions)

Entering the functions to draw (assuming you want to draw y= functions)

- Press [Y=] to enter function editor.
- Type in a function
- Press [ENTER] at the end of each function.
- In the screen capture 4 functions are slated to be
drawn.

Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

- Select the graph style:
The small piece of line to the left of a Y that defines a function is
the style.
- Move cursor on it and press [ENTER] .
- Each [ENTER] (on same line) selects another style.
- On the next screen you have all the styles available on the calculator.
- Do not select the bubble on line 6: It is for
animations. It will not leave a trace at the end of the plot.

Drawing the Graphs

- Press [GRAPH] to see the graphs.
- Here are the dimensions of the standard window

ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Apr 25, 2010 | Texas Instruments TI-84 Plus Calculator

Prepare calculator to graph

Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

Setup Graph type

Entering the functions to draw (assuming you want to draw y= functions)

Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

Drawing the Graphs

ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Turn StatPlotsOff to avoid errors:

Press [2nd][STATPLOT][4:PlotsOff][ENTER].

Setup Graph type

- Press [MODE] key.
- In Mode set up screen, make set the angle unit (if you are drawing trigonometric functions)..
- Use the arrows to move cursor to 3rd line to highlight degree or radian and press [ENTER]. The important thing is that you be aware of the unit so that you do not get unexpected results.
- On same screen, verify that
**Func**is highlighted. If you are drawing PARametric plots, POLar plots or SEQuence plots, you highlight the relevant item in the list - If it is not, use arrow to highlight Func and press [ENTER] to validate.
- Do not worry if you do not have exactly the same screen
as in the screen picture (We may have different OS Versions)

Entering the functions to draw (assuming you want to draw y= functions)

- Press [Y=] to enter function editor.
- Type in a function
- Press [ENTER] at the end of each function.
- In the screen capture 4 functions are slated to be
drawn.

Selecting the Graph Style (You may ignore this now, because it is unimportant for just one graph)

- Select the graph style:
The small piece of line to the left of a Y that defines a function is
the style.
- Move cursor on it and press [ENTER] .
- Each [ENTER] (on same line) selects another style.
- On the next screen you have all the styles available on the calculator.
- Do not select the bubble on line 6: It is for
animations. It will not leave a trace at the end of the plot.

Drawing the Graphs

- Press [GRAPH] to see the graphs.
- Here are the dimensions of the standard window

ZOOMING

You can also press [ZOOM] to adjust.

The selection 6:ZStandard sets the dimensions as on the screen Titled Window (above).

Mar 11, 2010 | Texas Instruments TI-84 Plus Silver...

Hello,

The marking that so puzzle you define the type of line (or dots) to represent the graphs. Enter as many functions as there are Y variables.

After entering a function press [ENTER] to jump to the next one.

When finished entering all functions press GRAPH. If you want graphs drawn one after the other, in MODE highlight Sequential (6th line) and press ENTER. If you want graphs drawn simultaneously, in MODE (6th line) highlight Simul and press ENTER. Press 2ND QUIT to return to previous screen . Execute graph again.

Hope itr helps.

The marking that so puzzle you define the type of line (or dots) to represent the graphs. Enter as many functions as there are Y variables.

After entering a function press [ENTER] to jump to the next one.

When finished entering all functions press GRAPH. If you want graphs drawn one after the other, in MODE highlight Sequential (6th line) and press ENTER. If you want graphs drawn simultaneously, in MODE (6th line) highlight Simul and press ENTER. Press 2ND QUIT to return to previous screen . Execute graph again.

Hope itr helps.

Sep 23, 2009 | Texas Instruments TI-83 Plus Silver...

82 people viewed this question

Usually answered in minutes!

Do you mean the axes? If the axes aren't showing (and they're in the window range), execute the AxesOn command from the menu.

×