Question about GE (PSS26MSRSS) Side by Side Refrigerator
Look for the information label inside the refrigerator side usually near the top of the box. It will have the model number and date of manufacture on it.
Posted on Oct 30, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hi: your model number dosn't get a match on a search. Did you check the defrost heater? I hope this helps Jeff,
Posted on Jun 01, 2009
Had the same problem. Bottom of freezer was about the right temp but the upper part was way too warm. Fridge side was fine. Ice maker stopped making ice - it wasn't broken, but it won't run through its cycle if the temp is too high. Cubes already in storage hopper melted and water refroze as it ran to lower, colder part of fridge. Problem: Fan controller for freezer compartment was faulty. The fan itself was fine. Fix: GE replaced the main circuit board that controls everything on this model, including the freezer compartment fan. Once that was done, temp returned to normal, ice maker is happy again. The board had undergone several revisions from the factory installed one (could tell this by comparing the part number on the old and new boards - they increment it when they revise it.) Bad news: the part/labor were expensive and of course failed after the warranty ran out. Good news: the board is now guaranteed for 5 yrs. (Why wouldn't the factory-installed board ALSO be good for five years instead of just one? It's not like the replacement boards are made better.) Labor is covered only for 90 days though so it won't be free if they have to come back after that.
Posted on Jun 13, 2009
The part # is MWF and a good site to help with these sort of finds is www.Appliance411.com And it will lead you to nearly any part or accessory you may need.
Posted on Jun 15, 2009
Check to see if there is any obstruction (object of any kind) in the ice cube mold area. If nothing found, you will have to replace the icemaker, as individual repair parts are not available.
Posted on Aug 04, 2009
If the refrigerator is not cooling it could be for a couple reasons.
Either there is an excess of ice buildup between the freezer and the refrigerator or the compressor is bad. If its just and ice buildup all you need to do is remove the ice by either defrosting the refrigerator or using hot water poured down into the air vent inside the machine.
If its not the ice, its probably the compressor in which case you would have to get a professional to come and replace it which is rather costly. In most cases you are better off buying a new machine rather than replacing the compressor. Especially since it is not that old and is already having a major problem. If you decide to buy a new machine I recommend Whirlpool brand appliances.
Posted on Dec 12, 2009
Tips for a great answer:
Apr 02, 2014 | Refrigerators
Feb 28, 2013 | General Electric GSS22JET Side by Side...
May 10, 2011 | GE Refrigerators
Mar 30, 2011 | GE Refrigerators
Mar 04, 2011 | GE (PSS26MSRSS) Side by Side Refrigerator
Dec 12, 2009 | GE Refrigerators
Aug 04, 2009 | GE Profile Arctica 25.4 Cubic Feet...
Jul 18, 2009 | GE Refrigerators
Jun 01, 2009 | GE Profile 26.6 cu. ft. Side-by-Side...
137 people viewed this question
Usually answered in minutes!