Question about Canon LASER SHOT LBP-5200 Printer

3 Answers

Canon Printed LBP 5200 Error Code E000

Hello,
I have a Canon LBP 5200 laer printer and cannot print. The error code is E000. How do I fix this problem? Rob. Email: rdulhunty@devcapital.com.au

Posted by on

  • 7 more comments 
  • rdulhunty Aug 10, 2008

    Where is the solution?

  • rdulhunty Aug 10, 2008

    Your answer was 'This error indicates fuser error, its not heating up.'



    What does that mean?

    What is the solution to this issue so that I can continue printing now?

  • rdulhunty Aug 10, 2008

    Hello,
    I have a Canon LBP 5200 laser printer and cannot print. The error code is E000. How do I fix this problem? Rob. Email: rdulhunty@devcapital.com.au

    The solution provided was 'This error indicates fuser error, its not heating up.'

    What does that mean?
    What is the solution to this issue so that I can continue printing now?

  • rdulhunty Aug 10, 2008

    What's the solution?

  • rdulhunty Aug 10, 2008

    Solution?

  • Anonymous Mar 22, 2014

    pls send

  • Anonymous Mar 23, 2014

    i am getting an error code 5200

  • Anonymous Mar 25, 2014

    my printer is error 5200 and not printing

  • Anonymous Mar 27, 2014

    service error 5200

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

This error indicates fuser error, its not heating up.

Posted on Aug 10, 2008

  • dewan nafees ahmed Aug 10, 2008

    1. Turn the printer off, wait 10 minutes, and
    then turn the printer on. 2. If the message persists, reseat the fuser.
    If that does not work, replace the fuser. To check the fuser, turn
    the printer off and remove the fuser. Measure the resistance between
    the fuser connectors. If it is not within the proper range, replace
    the fuser. If there is not continuity between the fuser connectors
    neutral and hot with the fuser removed, replace the fuser. If the
    problem is not related to the fuser, replace the engine controller
    board.

  • dewan nafees ahmed Aug 10, 2008

    please have the check on fuser for damage. Could be a thermistor, thermo switch, or faulty heaters. To clear error, service more
    function/clear/error/ok/ exit service mode and cycle power.

    fuser over temp means the fixing assy has exceeded the manufactures maximum temp limits

    Fuser error codes cannot be reset by power cycling the machine even
    though that is what the display tells you to do. In order to reset the
    fuser error code you must enter the service mode & reset the code.
    To enter the service mode:
    press"Additional Functions" button (looks like a picture of a head with a star inside)
    press the #2 and #8 at the same time (simultaneousley)
    press "additional functions" again
    The display should show a choice of
    copier,feeder,sorter,fax,or board service modes
    Select copier
    select clear
    select ERR
    press OK
    Turn power off & back on.
    ****IMPORTANT****
    After
    clearing error stay at the machine to see if it comes to ready. The
    fuser assy can reach 139 degrees C.(Water boils @ 100C) The error can
    only be cleared through the service mode because a technician should
    inspect the fuser to verify there is nothing faulty that could possibly
    start a fire. If you enter the service mode & clear the error,
    power cycle the machine & during warm up the machine throws a code
    again- turn it off, unplug it & call a tech for fuser repair.
    Good Luck!!


×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Canon Expert
  • 98 Answers

How to resolve Canon printers Error Code 5200? This error message can slow down the printing speed and thus require urgent attention from a professional expert. However, you can try out some quick remedies to fix this error message, some of which are mentioned below.
1.Unplug the printer from the power source
2.Remove the cartridge and printhead from the device
3.Wipe them thoroughly with a clean and dry cloth
4.Reinsert the cartridge and printhead inside the printer
5.Plug in the device with the power source and restart it
If you are facing the same error over and over again, you need to connect with our professionals via call, email or live chat support and allow us to resolve the issue from its roots by offering you quick and accurate solutions.
Do Visit Us to Get Solution: Canon Printer Error Code 5200

Posted on Jun 18, 2019

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 763 Answers

Try reinstalling the driver of your printer to your computer. it might solve the problem. make sure that you connect it properly and be detected by your computer. hope that helps!


CHARCOIS

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error problem


http://forum.testcopy.net/threads/how-to-fix-errors-based-on-error-code-table-of-canon-lbp-3100-3108-3010-3150.693/

Sep 29, 2014 | Canon I-Sensys Mf4410 All-In-One Laser...

1 Answer

Error code e000 0000


If Error code is E000 then may be major cause:

+ The thermistor has an open circuit or short curcuit
+ The heater has an open circut. The thermal fuse has blown
+ The power supply PCB has a fault
+ The engine controller PCB has a fault

To Fix Error code E000 of Canon LassetJet LBP-3300 printer, you can try the following:
+ Check connector of the fixing film unit
+ Replace the fixing film unit
+ Replace the power supply PCB
+ Replace the engine controller PCB

This is not a job for a novice. Get a service technician to service the unit.

Apr 23, 2014 | Canon LBP3300

1 Answer

Error code e000 0000


E1970000-Model No.- Canon LBP 2900B

Jan 26, 2014 | Canon LASER SHOT LBP-2900 Printer

1 Answer

Fixing unit error. Turn off and unplug the printer, and then contact the store where you purchased the printer or your service representative. When contacting the service representative, inform them of...


This is a print head error. If you have a cleaning option on the printer menu, please try that. If you dont, then you can remove the in cartridge and try cleaning the head with 1-tips and water or alcohol.

Jan 19, 2014 | Canon LASER SHOT LBP-2900 Printer

1 Answer

Error E000 can't print


When your printer fuser unite is not active to work then show Error E000 or fuse is out of order or work.Check it then solve your problem.

Dec 11, 2009 | Canon LASER SHOT LBP-5200 Printer

2 Answers

Error 5200


Error 5200 is a printhead temperature error, sounds like you need a new printhead. The part number is printed on the side of the printhead. it's a QY6 number

Aug 13, 2009 | Canon Pixma MP480 All-In-One InkJet...

1 Answer

CANON LBP 5200 error code100


Canon Laser all in one printer copy fax laser
when setting the printing preverencens it comes in the Spanich
lanquis how can i change it all the other ones are in the Englich installed from the driver It only do this in Vista not in XP pro
My old laptop in XP Pro works fine
my new laptop Toshiba and vista that is what happen

Jan 07, 2008 | Canon LASER SHOT LBP-5200 Printer

Not finding what you are looking for?
Canon LASER SHOT LBP-5200 Printer Logo

Related Topics:

2,052 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2243 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...