Question about Intermatic ET171C8 Electronic Timer

1 Answer

Hey i;m hector : MY PROBLEM / 7 DAYS SETUP NO WORK ; ( ej: TIME ON 8.00PM- TIME OFF 5.00AM( SEME DAYS MONDAY TO SUNDAYS?

Posted by on

Ad

1 Answer

Hi Hector.
You posted under ET171C8.
You have the timer in front of you, and whole manual cannot be repeated. So there are two options
1) Free option: Add a comment and say specifically where the programming is tricky. If you don't understand the buttons, or if display doesn't show, or if you can't find all days by pushing day button, or if you can't find the am pm choice.
2) Pay for fixya expert to walk you through each step via e-mail.

http://www.intermatic.com/~/media/files/intermatic/products/instructions/timers/et171c%20-%20english.ashx
http://www.intermatic.com/products/timers/electronic%20time%20switches/7%20day%2030%20amp.aspx

If display shows, then battery is correctly installed.

Instructions copied from manual:
1) RESET TIME SWITCH: Press the recessed RESET switch to reset the
microprocessor and delete any set point information which has been
programmed. NOTE: DO NOT press RESET after programming has
begun or you will lose all of your program information.
2) TO SET TIME AND DAY OF WEEK: Place the three position selector
in PROGRAM and the two position selector in CLK mode. Press the
HOUR, MINUTE and DAY buttons individually to select the current time
of day (12 hour AM/PM repeating) and the day of the week. Day 1 is
Sunday, day 2 is Monday, etc.
3) TO PROGRAM SET POINTS: Select PROGRAM mode with the three
position selector and OUTPUT mode with the two position selector.
Press the HOUR and MINUTE buttons separately to program the first set point time desired.
Press the DAY button to select the day the event is to occur.
Press the ON/OFF button to select an ON or OFF set point.
Press the ENTER button to enter that set point for the selected day.
Note that the ON or OFF indicator stops flashing only after pressing ENTER. If this set point is to occur for other days of the week, simply press the DAY button to select the next day then ENTER. Repeat for any additional days. Note that this allows you to utilize one set point for
any or all days of the week.
Then set timer to AUTO for programs to operate

Posted on Apr 27, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not access my e mail from icon getting blank page for last 5 days


To speak technical support representative dial +1 (800) 204-4427 (U.S.) 6 Am to 6 Am, (24*7 hours) Pacific Time, Monday through Sunday. If you needs a technical diagnosis you can call on our tech support team 1-800- 204-4427, which is especially open round-the-clock for online assistance.

Apr 20, 2017 | Icon Computers & Internet

1 Answer

What are the seven days of the week? They are Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, and Sunday. But what do you call the other 358 days of the year?


They're also Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. These are the names of the seven days of the week. A year is fifty-two weeks and a day (two on leap years).

May 13, 2014 | Office Equipment & Supplies

1 Answer

Draw a flowchart to enter a number from 1 to 7 and disply the corresponding day of the week. hint: 1 = sunday


program days;
uses crt;
var
m,n:integer;
begin
clscr;
write('enter number of day');
readln(n);
m:=n mod 7;
case m of
1:write('sunday');
2:write('monday');
3:write('tuesday');
4:write('wednesday');
5:write('thursday');
6:write('friday');
7:write('saturday');
end;
end.

Jan 10, 2011 | Computers & Internet

2 Answers

Hey guys, the 15079 GE timer has 20 on/off settings. Are they for the whole week?


Eeeckles,

The timer you mention 15079 does has 20 on/off settings that can be set during a 1 week period that will then repeat each week. For example Setting 1 could be to come ON on Monday at 5:00pm and turn OFF Monday at 11:00pm while setting 2 could be to turn ON on MWF at 3:00pm and OFF MWF at 3:30pm.

You can find all of the UPDATE GE Timer manuals at the manufactures website: http://www.jascoproducts.com/support/timer-quick-start-guide.asp

Blessings!

Dec 31, 2010 | Jasco 15079 SevenDay TwoOutlet Digital...

1 Answer

Intermatic EH10: I can't figure out how to set a schedule of Sun - Thurs, 8am on, 10pm off and Fri & Sat, 8am on, 11pm off. I tried every day of the week 8am on, 10pm off and Fri & Sat 8am on, 11pm...


http://waterheatertimer.org/pdf/eh10-manual.pdf

The EH10 is 120V digital timer.
The timer offers the following days:
-All 7 days
-Monday thru Friday
-Saturday and Sunday
-Each individual day
-Blankday (day skipper)

If I understand your schedule:
You want
Program1 ON at 8am Sunday
Program1 OFF at 10pm Sunday
Program2 ON at 8am Monday thru Friday (with blankday on Friday)
program2 OFF at 10pm Monday thru Friday (with blankday on Friday)

Program3 ON at 8am Friday
Program3 OFF at 11pm Friday
Program4 ON at 8am Saturday
Program4 OFF at 11pm Saturday

I filled in the chart for you.
I left off the display.
I do not have this timer and don't know 100% how the display looks without buying the timer.

geno_3245_16.jpg

If you need more help on a specific step in the manual, add a comment and I will answer.

Nov 07, 2010 | Intermatic 7 Day Electronic Timer Eh10...

1 Answer

I have purchased one GE A950 Digital camera from gift360, with in a one month its not operating.They are not giving any responce its in warrenty period. please give me the GE care center Address in...


dear sir,

kindly choose the service which you want and tell them that you have called g.e but they fail to respond you properly,they will then ring the service centre where they didn respond you and your problem will be solved...all are toll free numbers....

Call us on the phone
GE Answer CenterĀ®
1-800-626-2005
Monday - Friday: 8 a.m. - 10 p.m. ET
Saturday: 8 a.m. - 7 p.m. ET
Closed Sunday.
GE Genuine Parts
1-877-959-8688
Monday - Friday: 8 a.m. - 7 p.m. ET
Saturday: 8 a.m. - 5 p.m. ET
GE Warranty Management
1-800-626-2224
Monday - Friday: 8 a.m. - 8 p.m. ET
Saturday: 8 a.m. - 4 p.m. ET
GE Appliance Service
1-800-848-7620
Monday - Friday: 7 a.m. - 10 p.m. ET
Saturday - Sunday: 8 a.m. - 6 p.m. ET
GE Telephones
1-800-448-0329
Automated response 24 hours/day, Live agent 8 a.m. - 8 p.m. ET
GE Consumer Electronics
1-800-447-1700
Automated response 24 hours/day, Live agent 8 a.m. - 8 p.m. ET

thank you..take care

Oct 08, 2010 | GE Cameras

1 Answer

Is Day 1 Sunday or Monday


generally day 1 is always sunday

Apr 12, 2009 | Philips Audio Players & Recorders

1 Answer

Date & time.


To reset system time you must be at the attendant station and with the handset cradled:
Dial: #06 4321 1 # (4321 is the default password)
Then:#55 YY, MM, DD, W, HH, MM, # time will be saved and phone will go back to normal operation.

Naming convention:
YY - Last two digits of the year
MM - Month (1-12)
DD - Day of month (1-31)
W - Day of Week (monday = 1.... sunday = 7)
HH - Hour (24hr format)
MM - Minutes (00-59)

ex: To set the time For Monday, Jan. 5, 2009 at 8:31pm I would enter: 09 01 05 1 20 31 #

Good Luck,
BB

Dec 02, 2008 | Samsung Prostar 816 Phone

Not finding what you are looking for?
Intermatic ET171C8 Electronic Timer Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intermatic Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Mike

Level 3 Expert

4363 Answers

Cindy Wells

Level 3 Expert

6032 Answers

Are you an Intermatic Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...