Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset

2 Answers

I have Uniden DECT1480-3. I purchased two expandable handsets, but I cannot figure out how to get the new handsets to register with the base unit.

Posted by on

  • 1 more comment 
  • towhee3
    towhee3 Nov 29, 2012

    FANTASTIC!! worked great for me

  • Anonymous Mar 14, 2014

    trying to register new dect1480 uniden handset and nothing works

  • Anton Wolf
    Anton Wolf Jul 17, 2017

    Hi someone have a repair manual for this phone or can give me the position of the capacitor 1000uf 16v on base mainboard? Thanks

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 10 Answers

Up to 6 handsets can be registered with the DECT 1480 phones. I have the 5 phone unit and needed to add the 6th phone. All I got was "Searching" in the display and the battery wouldn't even charge!

So here's what you have to do to get additional phones (up to 6 units) to work with the base. If you can get past step 1, it's a snap...

Step 1: Place a charged battery in the handset. This could be a problem if all your handsets are not registered, since unregistered phones don't charge (who thought of that design?). What I did was SWAP the battery from an already registered and charged phone with the new unregistered phone.

Step 2: Here's where the magic happens. Press the 'END' and '#' keys simultaneously... hold them down until a System Reset menu appears. Select "Deregister HS" and press Menu.

Step 3: Now, do the same thing again (hold down END and #), but this time select Base Unavailable and press Menu. You will see Base Unavailable Yes/No... Select Yes. Then place the handset in the base, wait a few seconds, and Voila!. it's registered. You can even change handset numbers using this menu if you play around with it.

Thank you, helpful employee at Costco for supplying the magic code. And hey there, UNIDEN... including this in the operation manual would have saved many customers much grief with de-registered phones!

Enjoy!

Posted on Oct 28, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

This worked well with my DECT 1480 handsets. One thing I will add is with my older base unit I was connecting them to, (DECT 1560) I had to unplug the base then hold down the find button until the charge light was flashing to get them to pair up. I had to repeat this process for EACH handset.

Posted on Nov 02, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had to buy a new base for phones and got one phone with new base unit, within phone menus there is a place to Deregister the handset, but I can not locate how to Register the other handsets and nothing...


Hi, If there is not an option for registering the handsets then more than likely it is an automatic function-you may just need to place each handset into the base units cradle to register. Also maybe the base unit has a menu option for registering. I hope this helped, please write back if so and thank you for asking FixYa, Good luck-Prodzilla.

Apr 28, 2011 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

We had Uniden model TRU8866. Handset #2 was damaged and lost. We purchased a new phone through Uniden. It says Set #4 on it. We would like it to say #2 The new phone is a Power max5.8ghz.


In order to re-register handsets with TRU8866 base unit, you have to reset the base unit, de-register the handsets, and then re-register the handsets. To reset the base station, disconnect the power from the base and then press and hold the CID, Intercom, and Exit keys while you connect the power. Wait for the beep, and let go of the keys. Now re-register the handsets - the first one will become #1, and so on.

May 16, 2009 | Uniden Lands Phones

1 Answer

How to remove Uniden handset from base


The brillian people at Uniden don't feel it necessary to provide this type information in their manuals. You have to trial and error to find it, but what can you do. All you have to do to reset the base unit itself is to unplug the power, then while holding down the delete key, plug it back in. Hold the delete button down until you hear a beep, which indicates it has reset. Now you can readd handsets and they will start at 1.

Mar 08, 2009 | Uniden TCX905 Cordless Expansion Handset

1 Answer

Can I use handsets from another DCT 748 unit to expand my DCT 748


Short answer:
No. This model of phone can only support 4 handsets. If you need more than that, you will need to have a second base unit.

Detailed answer:
One of my handsets went bad, and I just bought complete DCT748-4 package from a seller on eBay for a very good price. This set was used, but in very good condition. I didn't need the whole set - just one handset - but like I said, it was a good price. Anyway, I began by telling my old base unit to de-register handset #2 (the failed unit). However, I then found that I could not register the "new" handset with my old base unit because it was already registered to the "new" base unit. So, I first had to apply power to the "new" base unit and de-register the handsets. Then, I placed one of the "new" handsets onto my old base unit, and it said "Handset Registering ..." and registered just fine. Just for the fun of it, I placed one of the other spare handsets into my old base unit. It said "Hanset Registering ..." but then it beeped and said "Registration Failed." This is because I already had 4 handsets registered to my base, and the base can not handle a fifth handset.

Feb 15, 2009 | Uniden DCT-748-4 Telephone

1 Answer

How do you register a waterproof phone (TWX977) to a TRS9585


Not sure if you still have this problem, but...

Basically go on you base unit, and hit "MENU/SELECT". Scroll down to "REGISTER HANDSET" and click "MENU/SELECT". On your waterproof handset, hold the "#" key until it displays "REGISTERING HANDSET". And voila! After that finishes, your waterproof handset will be good to go!

Feb 03, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Trying to register used handsets


There are a couple of things that may be the problem with this. First, are you sure that the handsets are compatable with the base you are trying to register them to? Second, how many handsets are currently registered to the base unit? You may be trying to register more handsets than the base can handle. and lastly, try doind the de-registration of the handset this way, press and hold the "End" key, while pressing the "End" key, also press the "#" key. The lcd should show two options, select "Base Unavailible" and confirm. The LCD on the handset should then say to place it in the base to register it. If that doesn't work, post with the results of trying the above steps and I will try to help you further.

Jan 08, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Adding a new handset


You need to register the new handset with the base.
In Global settings De-register the new handset then place it on the main base unit connected. It should then register.

Jun 30, 2008 | Uniden TRU8885 Cordless Phone

7 Answers

Uniden handset TCX905 with base unit TRU8866-if compatible?


I just successfully registered 4 TCX905s with my TRU8865 base - it's documented in the TCX905 manual.

Be sure the handset you want to register is fully charged.

Remove the handset you want to register from its charger.

Now unplug the AC for the main base, hold down the 'find handset' key on the base and plug the AC in again, when it beeps, you can let go of that button.

Hold down the '#' on the handset you want to register, it will show 'Registering Handset...' and when it beeps, it's done - registered, you're good to go :)

Oct 11, 2007 | Uniden TCX905 Cordless Expansion Handset

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

5,184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

6027 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...