Question about Panasonic KX-T7630 Corded Phone

Open Question

My KX-T7630 is daisy chained through another handset and then to a TDA30. My light on the speed dial on all handsets is constantly red. I can be transfered to and everything as usual except I can't take incoming external calls. These are routed to the reception phone, but all other handsets can take the call except mine. It says "line busy". How do I fix?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
cnavarro

Carl Navarro

  • 2460 Answers

SOURCE: Night switching for KX-T7630

You have 4 different modes of calling available to be programmed: DAY NIGHT BREAK and LUNCH. Your installer has to set up the ICD groups, but you can create a LUNCH group which looks like the day mode but rings all phones. The codes are accessed by dialing on the intercom *780x where 0 is day 1 is night 2 is lunch and 3 is break.

You may use the NIGHT mode in the daytime, but if you have voice mail, it will play the night greeting instead of a day greeting.

Carl


Posted on Sep 09, 2008

Ad

Anonymous

  • 9 Answers

SOURCE: sync a new handset to kx-tg5632 phone

This works on MY panasonic; May work on yours too!

Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {0}{0}{1}
2 Base unit:
Press and hold {LOCATOR/
INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1
minute.
3 Handset:
Press {OK}, then wait until a beep
sounds.
4 {OFF}
Registering an additional handset
See page 5 for information on the
available model.
Start from step 2.

Posted on Jan 01, 2009

john milligan

  • 514 Answers

SOURCE: Kx-tg1100 registration to anoter base

sorry, it seems that they have to come from the same model base. however, the procedure to reset handset numbers for the 1100 may work for you. there is a 15 digit number on the base unit. try to type that into the 1100 and see if that will register the 1100 to your old base.

Posted on Jan 09, 2009

Anonymous

  • 212 Answers

SOURCE: how to transfer an incoming call to the other

you have to configure the call divert

Posted on Jul 16, 2009

cnavarro

Carl Navarro

  • 2460 Answers

SOURCE: Changing Panasonic KX- T7630 Business Phone Answering Message

You don't "lose" the manual, it comes on a CD. The Panasonic system probably has a TVA voice mail system and it requires you to change the Auto Attendant greeting from the message manager's mailbox. If you don't have the passwords for mailbox 998 and 999, you need to contact someone who has them and a layout of the system.

Your Panasonic technician can guide you through the process.

Carl

Posted on Apr 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yellow light constantly flashes on all handsets


Yellow light constantly blinks on top of all the cordless phones

www.faqqq.com/.../yellow-light-constantly-blinks-on-top-of-all-the-cord...
Question Product: Panasonic KX-TG5432 Digital Dual Cordless Telephone Question Details: Yellow light constantly blinks on top of all the cordless phones The.

Panasonic KX-TGP550 Normal Status Lights

www.statuslights.com/panasonic/panasonic-kx-tgp550.html
Red (Rapidly Flashing), The Base Unit is paging handsets. (KX-TGP-500 only). Amber(Solid), The Base Unit's IP address may conflict with the IP addresses of ..

Jan 16, 2016 | Panasonic KX-TG7641M KX TG7641M KXTG7641M...

1 Answer

Our KX-T7630 seems to delay a few days before sending individual message bank messages through to individual handsets. How can this be? I arrive at the Office, take 2 or 3 messages off, the phone...


Hi
When your red light is on with the handest down presss the message key. this will tell you where the message has come from. I expect you will see that an internal extension has dialled you by mistake. It is a message waiting function on the system for user to call back on. Nothing to worry about. To clear the light you have 2 options either press the clear button on the display for each message or dial *700(then your extension number)

Speak Soon

Phil

Oct 28, 2012 | Panasonic KX-T7630 Corded Phone

1 Answer

Two questions: We have Panasonic KX-T7630 model How do I change/delete numbers to the personal speed dial numbers. Second, one of our phones has two buttons on the right lit up in Red like there are no...


If you mean the 10 number stored in 00-09, from the phone, pick up the handset (or press intercom) and dial *30 00-09 9 plus the number and # You'll hear a confirming tone. That stores the number. To dial, you press Autodial *00-09 and it dials the number.

What's under the buttons? Press PROG and the button and it will show what's there. Probably a digital station that isn't there. Press 2 and STORE and you'll clear the button.

Carl

Sep 28, 2011 | Panasonic KX-T7630 Corded Phone

1 Answer

How do i divert all calls from the kx-t7630 to a mobile?


Hi,

You must subscribe to you Landline Supplyer for 'Call Divert Services' If Say you already Subscribe to BT.

The Proccess is access line... the on the Keypay dial... *21* (then The No; to be Diverted To) then confirm by pressing the # Key. Wait and the No; will be repeated to you.
To take off call divert access line dial #21#

When 'Call Divert' is set you will receive broken dial tone. through the Handset.

(Like a Siren)

Jun 28, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

I need to change the time on my panasonic kx-t7630


If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system.
From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook:
1. Press PROGRAM * * or PROGRAM * # followed by the system password ( default is 1234).
2. Now press 000 and then ENTER.
3. Enter the last 2 digits of the year and then select the month with either SEL+ or AUTO ANS / MUTE.
4. Scroll right with the right arrow key and change the date.
5. Press the NEXT button on the screen and the time will appear.
6. Set the time. Press AUTO DIAL / STORE to save your changes.
7. Lift the handset and put it down to exit program mode.

Mar 27, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

How i setting the hour in the KX t7630?


If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system.
From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook:
1. Press PROGRAM * * or PROGRAM * # followed by the system password ( default is 1234).
2. Now press 000 and then ENTER.
3. Enter the last 2 digits of the year and then select the month with either SEL+ or AUTO ANS / MUTE.
4. Scroll right with the right arrow key and change the date.
5. Press the NEXT button on the screen and the time will appear.
6. Set the time. Press AUTO DIAL / STORE to save your changes.
7. Lift the handset and put it down to exit program mode.

Jan 25, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

May I know how to turn off the BMG of KXT616?


To turn off background music lift the handset and dial 750# and replace the handset (to turn on is 751#)

Oct 20, 2009 | Panasonic KX-T7630 Corded Phone

1 Answer

Programming help


If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system. From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook press Program * * or Program * # followed by the system password ( default is 1234). Now press 004 and then ENTER. Enter the extension number you want to change. Now enter the name (the same way as texting on a cellphone) To save the changes press AUTO DIAL / STORE. To go to the next extension press NEXT on the screen. When you are done lift the handset and put it down to exit program mode.
PLEASE rate/vote this answer if it was helpfull.
THANK YOU

Dec 23, 2008 | Panasonic KX-T7630 Corded Phone

1 Answer

UN Forwarding calls


Pick up handset, dial 710 then #, hang up.

May 29, 2008 | Panasonic KX-T7630 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7630 Corded Phone Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

martin hogg

Level 2 Expert

157 Answers

guyvstewart

Level 2 Expert

115 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...