Question about Magnum DeltaForce CB Radio

1 Answer

I have a general lee cb with a 4-pin standard mic. the wires in my mic cord broke at the plug. does wnyone know how to wire this type of mic back and what color wires go to the correct pin?there are 6 diffrent wires and im not sure how to do this. there is a blue, white, red, yellow, brown, and a bare cooper wire. please help i miss my radio

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Here are the Pin outs for different mics that will work with your radio. If a wire is not listed then you cut it off. It's best to keep the wires as short as possible no longer than a half inch is suggested. Normally the Cobra pin out is standard for most radios.

Stock - 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)

Astatic - (4 wire) 1- Shield 2- White 3- Red 4- Black

Astatic - (6 wire) 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500, Cobra, CA Series - 1- Shield & Black 2- Red 3- White 4- Blue

Galaxy DC-521S - (4 wire) 1- Shield 2- Yellow 3- Red 4- Black

Galaxy CB-660EI - 1- Shield & Black 2- White 3- Red 4- Blue

Sadelta - 1- Shield 2- White 3- Brown 4- Green

Turner - 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC

Posted on Jul 12, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Moc plug 4 pin to a 5 pin


it's not possible to wire 4 wire mics to the uniden 5 wire radios without modifying the mic and replacing the mic cord

Jan 06, 2014 | Uniden Bearcat Pro PC68XL 40-Channels Base...

1 Answer

I have a cobra hg m73 mic and the wire broke.i dont know the pin color code


it depends on what kind of radio youre using and how many wires are in the mic cord

Apr 06, 2013 | Cobra Highgear 70 Hg M73 Standard Dynamic...

1 Answer

I need a wiring digram for a rk 56 inside the mike my wires are broke need to know were to put them back connex 3300hp



  • With the switch sitting as it is in the picture below (actual switch recessed tho the right. Soldier the wires in this order.


  1. Black
  2. Red
  3. Lite Blue.
  4. Dark Yellow (This yellow wire comes from the mic cord itself)
  5. Shield.
  6. Lite Yellow. (This yellow wire runs off to the side of the mike to the electrical components inside the mic)

ironfist109_297.jpg


  • Standard 4 pin Cobra mic tip to run it to that Connex.

  • Pin 1 - Shield.
  • Pin 2 - White.
  • Pin 3 - Red.
  • Pin 4 - Black.

  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 05, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

Need wiring for roadking mic to deltaforce magnum radio


Turner
1-Shield & Red
2-White
3-Blue
4-Black
Yellow NC

Road King standard 4 pin wiring Gallaxy/ranger/cobra..............Magnum
I have no info on the 5 pin as i know the OmegaForce version has an addition mic plug, i figure yours might also.

Jul 29, 2011 | Magnum DeltaForce CB Radio

2 Answers

I have a Midland CB Car with no mike or a car power pluge, the model # is 70 - 336B and the serial # is 760408


Your midland CB will use a standard 4 pin wired CB plug which is most common for most mics sold today. Your power cord will be a standard 3 pin CB power cord which again is most common with CB's today. You need not purchase a "radio specific" cord or mic. Cobra, Uniden, Midland all the same mic pin out and power cords. Good luck.

Feb 09, 2011 | Radio Communications

2 Answers

Wiring is broke on 4 pin mike plug


O.K. Jeff
The shield which is on #1 should be wrapped around another wire the wire it's wrapped around is your audio wire that will go on #2 pin then you take the remaining two wires and put one on #3 and one on #4 and plug the mic in if the radio keys up without pushing the button then you need to switch #3 and #4 if it does'nt and it keys up when you push the button all is good again.Good luck......Dan

Apr 02, 2009 | Cobra 29 LTD CB Radio

Not finding what you are looking for?
Radio Communications Logo

745 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magnum Radio Communications Experts

Brad Brown

Level 3 Expert

18108 Answers

Tom

Level 1 Expert

23 Answers

John Porter

Level 2 Expert

95 Answers

Are you a Magnum Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...