Question about Estate TGP200VDQ Gas Range

1 Answer

My oven pilot light won't stay lit. Range top works just fine. I press the oven temp control knob and light the oven pilot. It stays lit so long as I keep the knob pressed in, though the flame is a little noisy. When I release the knob, the flame goes out. Sears has looked at it and could not solve the issue. They sent me a replacement of the entire mechanical system, which I've installed but its the same thing.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

OK try locating and replacing the Thermistor temperature sensor? Either that or the Thermostat for the Oven?
http://www.motherearthnews.com/Do-It-Yourself/1994-08-01/Gas-Stove-Repairs.aspx
http://fixitnow.com/2004/09/appliance-repair-revelation_17.htm
http://www.democraticunderground.com/discuss/duboard.php?az=view_all&address=287x7286

http://www.mrappliance.com/expert/repair-manual/gas-ovens/
Please find above several DIY help sites perhaps these can help you.
I MUST caution you too about working on Gas appliances please be very careful indeed. These are NOT to be trifled with, please if in doubt call in a professional, get a qualified gas appliance repair person to have a look at it, any competent professional should be able to sort this out pretty easily. If worried about costings ask for a "Quote" first only.

Posted on Jul 30, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven lights but then flame goes out as soon as I release the knob


The flame sensor seems to be bad.

When I light my pilot light, it stays on till I release the button ...

askville.amazon.com > Home > Home Improvement
Mar 18, 2008 - Similar Questions: light pilot stays till release button suggestions ... If you have held it for a long time and it still won't stay lit, then your thermocouple is bad.... the gas valve doesn't think a flame is burning the gas coming out of the pilot ... less likely but somewhat common is the gasvalve... if the knob you are ...

Troubleshooting Gas Range and Oven Problems ' Back ...

blog.etundra.com > Tundra's Tech Talk

Dec 15, 2015 | Fisher Paykel Fisher & Paykel 24-in...

1 Answer

Error Code E-08 on Samsung Gas Range. Oven will not heat but range top works.


Is there a gas pilot light that stays lit all the time or does it have an electric pilot light that glows red to start the oven.Either way if it's a gas pilot the thermocouple is bad, if electric the igniter is bad.

Jan 03, 2014 | Samsung Kitchen Ranges

1 Answer

I bought from a private party a used Wolf range Challenger Model CHR-4-29-HB11, oven worked fine. First I was baking and heard stove making a phfttt, phftt, noise. Then took food out and noticed oven...


Pilot lights go out because the Thermocoupler is either bad or not getting hot enough. It will be a copper tube that should touch the pilot light flame. these are replaceable and usually any appliance repair supplier can get you one. Some units reuire changing out the entire gas control

Oct 17, 2013 | Wolf Range CHR-10-229-FT11 Kitchen Range

1 Answer

I changed the thermo coupler and the pilot light does stay lit but the burners won't light


If you are referring to a gas fireplace:

  • Make sure the pilot knob is turned from "pilot" to "ON" or it will never run.
  • If the pilot knob is "ON", and the pilot is lit, but the burner won't light, it could be a bad Thermopile. The thermopile is the other safety mechanism in the pilot assembly that controls the burner.

Dec 19, 2012 | Heating & Cooling

1 Answer

Pilot light won't stay on


What is the model number of the unit?

Nov 27, 2012 | Tappan Kitchen Ranges

1 Answer

Burner won't light, pilot is burning just fine.


Once you get the pilot to light and stay lit did yall move the burner knob to the ON position? Is the temp knob all the way up?

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Nov 27, 2011 | Procom Heating & Cooling

1 Answer

My electrolux oven won't stay lit


Right above your pilot light, there is a little temperature probe. It either needs to be cleaned, replaced, or adjusted closer to the top of the pilot flame. Hope this helps. Good luck!

Nov 07, 2009 | Cars & Trucks

2 Answers

My magic chef kitchen range oven won't turn on, no gas


Some of the models require you to push in the oven thermostat knob to set the pilot if it blows out. So try pushing in the knob and hold it while lighting the pilot. When the pilot lights continue to hold the knob in for about a minute. When you let go of the knob the pilot should stay lit. If it does not stay lit then try it one more time. If it continues to go out the thermocouple or aso might be bad and will need service.

Sep 11, 2009 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Propane not getting to oven... stove top works fine..


The pilot light must be lit and stay lit before you will have any propane coming into the oven. This is a safety feature.

May 17, 2009 | Magic Chef 9122 Gas Single Oven

1 Answer

Garland stove oven pilot light does not stay lit


If there is any adjustment, it would be a small screw on the oven control accessible with the oven control knob removed. This adjustment affects the size of the top burner pilots, but I'm not sure about the oven. The oven pilot orifice may have an obstruction, or if the flame is actually normal size where it covers the thermocouple when it burns, you may have a thermocouple problem.

Dec 22, 2008 | Garland H283 Gas Kitchen Range

Not finding what you are looking for?
Estate TGP200VDQ Gas Range Logo

Related Topics:

728 people viewed this question

Ask a Question

Usually answered in minutes!

Top Estate Kitchen Ranges Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Paul Carew

Level 3 Expert

3476 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you an Estate Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...