Questions & Answers for: 96 blazer engine

Ad

Question about 1996 Blazer

4 Answers

96 chevey blazer 4x4 no power to front wheels when in 4 wheel drive.....front drive line does turn Sounds like the front axle electric actuator is bad. these are mounted on the front differential ...

Ad

Question about 1996 Blazer

2 Answers

96 chevy blazer I just bought my truck Friday and hauled it to my house. I have a 1996 chevy blazer s10 style with a 4.3L vortec engine in it. The problem is it has no power at all. No lights,no radio

Ad

...96 Jimmy v6 vortc My engine blew up with 141K on it, I cant find an engine to fit it. will a 98 fit a 96 V6 vortec? or what are my other engine options i think it will but if you go on craigslist.com ...

Question about 1996 Blazer

2 Answers

96 blazer won't start had problems with 96 blazer not starting once in a while,then it wouldn't start at all,so I replaced the relay switch,nothing, waitied a couple hrs,it started again,finally ...

96 chevy blazer 3rd gear and overdrive slipping I have a 96 chevy blazer. 1st and 2nd gears shift fine. 3rd and overdrive slip but still work. The fluid is not burnt. Any solutions? i got a 1996 chev.

BLAZER? yes it will bolt right in. as long as they have the same engine VIN "Z" 8th digit. YES, but check all connectors on every sensor ect. big difference in computers from 92 to 96, I would use the

Question about 1996 Blazer

1 Answer

...96 chevy blazer? The engine control module is the only thing that can turn on or off that light. With the key on, engine off the light should come on as a bulb check. Light could be burnt out. Good ...

...Blazer the same? Both are 4.3ltr engines. Can I put the 96 into the 97? Seems like your good to go... http://en.wikipedia.org/wiki/Chevrolet_S-10_Blazer#Second_generation if i remember they are the ...

96 blazer starts but dies when put in drive Check your fuel pressure it should be 60-66 psi with key and engine off.These engines need at least 52 psi to open the popet valve inthe injectors to allow ...

...96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start 1989 Chevy blazer ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22434 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...