Questions & Answers for: brake lamp

Ad

Question about 2006 i-280

1 Answer

...BRAKE LAMP FUNCTION OR BRAKE LAMPS THAT ARE ILLUMINATED AT ALL TIMES. THE CENTER HIGH-MOUNTED STOP LAMP (CHMSL) IS AFFECTED IN BOTH INSTANCES. ALSO, IF EQUIPPED, THE CRUISE CONTROL WILL BECOME ...

Ad

Question about 1994 Skylark

1 Answer

amp blown fuse. I worked for a GM dealership,The problem maybe in the turn signal switch. The brake lamp circuit is wired into it to turn off cruise control.The third brake lamp is a circuit by itself

Ad

brake light warning lamp and the ''R'' (reverse) light illuminate. All Brake lamps test OK. I replaced all the brake lamps and continue to see the problem. If I remove the 2 lamp on the trunk lid. the

...BRAKE LAMP FUNCTION OR BRAKE LAMPS THAT ARE ILLUMINATED AT ALL TIMES. THE CENTER HIGH-MOUNTED STOP LAMP (CHMSL) IS AFFECTED IN BOTH INSTANCES. ALSO, IF EQUIPPED, THE CRUISE CONTROL WILL BECOME ...

Question about 2006 Sonata

1 Answer

...brake lamp circuit. use a multimeter to check the +12 volt or use a test lamp of 12 volts. 2. Check the brake lamp pressure switch which is mounted on the master cyclinder- brake pedal. check for ...

...brake lamp switch to determine if the brakes are applied.The first thing to do is to check your brake lights to see if they are working.  If the brake lights are working, then your problem is ...

brake lamp light comes on & off yet all of the back lights work properly why does the brake lamp light come on if the lights work properly i have a 1991 honda accord the brake lamp light comes on &

brake lamp circuits.  The first thing to do is to check your brake lamps to see if they are working.If the brake lamps are working, the solenoid is most likely defective.  If the brake lamps

...lamp. "brake indicator used for vehicles manufactured for the United States consists of the word "BRAKE" imprinted on a red lens" and The Rest-Of-World (ROW) market version of this indicator has ...

brake pedal, the switch contacts open and battery positive voltage is interrupted to the BCM. The BCM then supplies voltage to both the turn/stop lamp supply voltage circuit and trailer rear turn/stop

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22408 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...