Questions & Answers for: HP DesignJet carriage error

Ad

Question about DesignJet 800 Printer

1 Answer

...Error: 86:01 Problem Description: Carriage-Axis shutdown. Corrective Action: If this error code appeared but was NOT caused by a paper jam, then try the following:  Too much friction in the Slider ...

Ad

Question about DesignJet 1050c plus InkJet Printer

1 Answer

...error type 2 Something (not sure what) is obstructing the movement of the carriage assembly. Turn off the power and remove the cleaners. Push the carriage assembly out and pull/push the belt to move ...

Ad

Question about DesignJet 500ps (42 in.) InkJet Printer

2 Answers

...error number 86 :01. Pls. i need assistance 86.01 can be a couple of issues pertaining to the movement of the carriage assembly. 1. Too much friction in the Slider Rod. Lubricate the slider rod. 2. ...

Question about DesignJet 500ps InkJet Printer

3 Answers

...error is a worn out carriage belt. The belt or belt repair kit can be ordered from: http://www.lpscomputer.com/c-737-designjet-500-800-belts-kits.aspx You might also want to watch a belt replacement ...

Question about DesignJet 110 Plus InkJet Printer

1 Answer

...carriage movement error. Unplug the unit for a minute then power it up again. If there is still an error code check for obstructions in the carriage path. Make sure that the carriage moves freely. ...

Question about Designjet Z6100 InkJet Printer

1 Answer

...carriage causes this error)# trailing cable flexibility good? or its obstructing the carriage path?# take out cutter assembly from rail.. check..# Check carriage belt tension, ...

Question about DesignJet 500 InkJet Printer

1 Answer

...carriage moves or system error 86:01 is being displayed on the printer's front panel. General causes are media or other obstructions in the carriage path, the trailing cable, worn carriage bushings, ...

Question about DesignJet 500ps (42 in.) InkJet Printer

1 Answer

...error code gives : Carriage failure. The possible cause could be: The Carriage PCA is not compatible with the rest of the Printer. The Carriage ASIC has problems initializing. The +2.5V reference ...

Question about Designjet T610 24-in printer InkJet

1 Answer

...error code 86 errors are caused by the carriage not being able to travel completely from left to right. Either something is blocking the carriage, or the belt has broken. Open the lid and check ...

Question about DesignJet 9000 InkJet Printer

1 Answer

...Error Description: The Paper-Axis or the Scan-Axis Motor moves the Carriage, but the input from the Linear Encoder Sensor does not change The easy thing to do is to check the "encoder strip". It's a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...