Questions & Answers for: cb mike

Ad

Question about 148 GTL 120-Channels Base CB Radio

2 Answers

...wiring diagrams and see which pin on the mike is audio then look where that pin hole goes in on the mike socket in the cb then solder your audiowire to that spot on the inside part of your mike ...

Ad

Question about PRO510XL 40-Channels Base CB Radio

1 Answer

...mike.i have my cb radio hooked to the 12 volt acc plug in my tractor.what is the proper way to hook up a cb radio. could the mike be bad? this is not a new radio if you have a power mic , you might ...

Ad

Question about PRO510XL 40-Channels Base CB Radio

1 Answer

...cb with a echo power mike on it,i can pick up other radios fine but it will not transmit,put new battery in mike also tried other working mike on radio.no help.any ideas.thanks jb Have you tried a ...

need wiring schematics for mike for harley ultra. plug on end of mike that goes in bike I have a 93 ultra with same problem. need new cord and mike switch. the mike says Midland on it switch 1 and 2 ...

Question about DeltaForce CB Radio

1 Answer

...mike to browning cb radio need color code to wire banana mike to browning mark 4, cb base radio. 1)white 2)red shell) black and shield. If radio keys up as soon as you plug the mic in switch the red ...

Question about 29 LTD CB Radio

1 Answer

mike will not key in Take to a CB shop. It is possibly just a bad mike cord.

what is the wiring diagram of a general lee cb mike to its plug that goes into the cb For What mike?

...cannot get any feedback Make sure you have the radio on cb not pa, turn the squelch to the left, turn RF gain to max. check the mike and antenna, key the mike, does it key up?....hope this

Question about DX- 88HL Base CB Radio

2 Answers

I have no mike audio. Where's the mic gain pot inside the radio? Take the cover off and look for VR14,hope this helps.. Try another mike, problem could be in a broken mike wire, usually at the plug...

Question about 29 LTD CB Radio

1 Answer

have a sequel when keyed up driver could not hear anything but sequel If this is a powered mike the modulation is set to high. If you have a standard mike check your settings on the radio, if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18108 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...