Questions & Answers for: Proform error message

Ad

Question about 785 Treadmill

1 Answer

error message E21 E21 means the treadmill is not picking up a speed signal once the start key is pressed. First, determine if the motor is turning before you get the E21 or not. If the motor turns, ...

Ad

Question about 560hr Treadmill Walking Belt

1 Answer

...ERROR MESSAGE IF THIS STEP IS SKIPPED. After completing calibration of the speed, press the Speed Down key. The treadmill will automatically return to 0 MPH. Please allow the unit to stop completely ...

Ad

...ERROR MESSAGE IF THIS STEP IS SKIPPED. After completing calibration of incline, press the Stop key and then remove the safety key. If the incline moves but you it will not operate normally nor ...

Question about 650 Crosstrainer Treadmill

1 Answer

...ERROR MESSAGE IF THIS STEP IS SKIPPED.After completing calibration of incline, press the Stop key and then remove the safety key. If the incline moves but you it will not operate normally nor ...

Question about 650 Crosstrainer Treadmill

1 Answer

automatically. 4) THIS IS A VERY IMPORTANT STEP BECAUSE YOU WILL GET AN ERROR MESSAGE IF THIS STEP IS SKIPPED.After completing calibration of incline, press the Stop key and then remove the safety key

Question about 560hr Treadmill Walking Belt

1 Answer

...error message. I pick up the back of the treadmill a few inches off the floor and put it back down and it works. I turn it off and get the SI 3 error message again but as soon as I pick up the back ...

Question about Sport 1000 Folding Treadmill PFTL91205 - !

2 Answers

...error message is consistently displayed when the unit is powered up, the upper PCA should be replaced. It is possible to see one of these messages displayed intermittently due to external causes. If ...

Question about Perspective Es Treadmill PFTL99806

1 Answer

error 2 message 1) reset the treadmil.2) adjust the speed sensor, see the diagram attached. 3) Run the software calibration for easy diagnostic and fix it. God bless you 1 Unplug the treadmill. Locate

Question about Freespirit 814 Treadmill Drive Motor

1 Answer

...ERROR MESSAGE MY TREADMILL STARTED AND GOT ERR OR MESSAGE AND WONT START A proximity sensor is telling you the belt is incorrectly aligned. Probably too loose. Bolts on end of shafts control belt ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Proform Exercise and Fitnes Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

jay kaye
jay kaye

Level 3 Expert

304 Answers

Are you a Proform Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...