Questions & Answers for: fan error

Ad

Question about C5150n Led Printer

1 Answer

127: fatal error my printer shows this error, tech support mailed me that this a fan error? which fan? thanks ron huynen Fuser Unit Fan Error When an error has been detected in the fuser cooling fan

Ad

Question about C5150n Led Printer

1 Answer

...Fan Failure Message (Code / Error 48) Cause: The machine logic detected a failure of the Fuser fan, LVPS fan or rear fan. Solution: Fixed! Did not fix. Insure there is adequate ventilation around ...

Ad

Question about Compaq ProLiant DL580 G4 (430811001) Server

1 Answer

Fan flow error 1611 I/O After power down we receive 1611 I/O Fan error. Server is old and we could not find documentation. Please help! The ProLiant DL380 G3 server requires that both primary and ...

Question about LaserJet 9500n Printer

3 Answers

...fan error replace them ur problem will be resolved 6L/5L Check memory card compatibliity - 1,2,4,8 MB, 5 volt, 70 nanosecond or faster6P/5P/5 Main motor problem, check gear train for binding. Check ...

Question about LaserJet 9500n Printer

2 Answers

...fan error - Paper exit fan motor M28 defective, indexed as 146, electrical component layout. B132/B200 SC 534 Duplex exhaust fan error - check and or replace fusing exhaust fan / paper blocking fan ...

Question about HLM507W 50" Rear Projection HDTV

1 Answer

...fan error on screen. Found that #1 fan (lamp fan) was not turning. Found a similar fan with similar specs on internet. Replaced fan. Now fan is working but #1 fan error flashes on and off. Do I need ...

Question about LaserJet 8150 Printer

1 Answer

fan error has occurred with the power supply fan. This issue can also be due to laser/scanner fan. Make sure both the fans are working perfectly fine. If the fans are fine, then the error is due to DC

Question about CLC 1150 Color Copier

1 Answer

error. 0003 The exhaust fan (FM2) has stopped to rotate in error. 0004 The ozone suction fan (FM5) has stopped to rotate in error. 0005 The toner suction fan (FM6) has stopped to rotate in error. 0006

Question about 3745 Fan Fan Assembly

1 Answer

Fan 4 had a rotation error reported. Version: cisco 3745 (R7000) error logs: Mar 16 22:39:01.369 GMT: %FAN-3-FAN_FAILED: Fan 4 had a rotation error reported. Mar 16 22:39:31.361 GMT: %FAN-3-FAN_FAILED

...fan error) When the cooling fan of the main body starts, the fan lock detection signal (FAN_LOCK) has been held at the "H" level for longer than the prescribed time. also check your low-voltage power ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...