...FOCUS ERROR. WHEN THE TELEVISION SCANS THE COLOR BLUE IT CANNOT GET THE LOWER LINE TO STRAIGHTEN AND THEN THE TOUCH FOCUS ERROR APPEARS. IF I TRY TO ADJUST THE COLORS MANUALLY THE COLOR BLUE WILL NOT ...
...Color started with a yellow/green tint for about 2 weeks. Now it is only black and white. Tried the magic focus and all the colors work fine but picture returns black and white. Any ideas? I have a ...
...Green, Cyan and Blue. Reset the Color Balance to the factory default settings. Align the focus (convergence) of the TV's projected light beams or reset the focus to the factory default
Question about AV-56WP74 56" Rear Projection HDTV-Ready Television
...color and focus inside case How do I go about setting the focus and color inside using the 6 knobs? I just replaced the IC's and I tried adjusting the focus prior to replacing the IC's. Now I need ...
Question about KP-43T90 43" Rear Projection Television
Flash Focus does not focus the TV colors are seperated The flash focus does not focus the TV when pushed it tries but the colors are seperated. if that doesn't work it will need new convergence IC's ...
Question about 43UWX10B 43" Rear Projection Television
...color in picture, magic focus shows red though can't get red color in picture, tried magic focus and there is a bright red showing on screen when magic focus running. All other functions seems fine, ...
Question about KP-57HW40 57" Rear Projection Television
color, hue, sharpness, brightness, exc. can be adjusted when when using the menu button on the remote. Flash focus did not fix the problem. I can post pic if needed. Thanks in advance for you help. If
color focus picture is almost like it is in 3d tried to color focus the focus sequence starts but does not finish Convergence amps need repair. Requires troubleshooting with meters, and soldering with
won't focus colors .. can see blue red green seperate ,, tried auto focus did not work colors won't focus and I tried using auto focus. How do you correct the problem? How do you adjust the tubes?
Usually answered in minutes!
Step 2: Please assign your manual to a product: