Questions & Answers for: Minolta where is the fuser lamp

Ad

Question about Di2510 All-In-One Laser Printer

3 Answers

...might be extremely low on toner, do a service reset and view through vent holes in the fuser upper cover to verify fuser lamp lighting. tray light flashing is paper low indicator. hope this helps. ...

Ad

Question about EP1030/1030F CS/PRO Copier

1 Answer

fuser lamp inside the fuser roller of the heating unit, you may try to reset before you go for it; the easy way just open and close the lower front door,just try it and let me know the resolve. HAVE A

Ad

Question about magicolor 2200 DeskLaser Printer

1 Answer

Magicolor 2200 error Service Call 1f fuser low therm What does this mean? We just replaced the transfer belt (cost $365), and then got this additional error message. Thanks in advance for any help you

Question about magicolor 2200 DeskLaser Printer

1 Answer

get message of fuser low therm 1F get message of fuser low therm 1F One of the two small thermostats, that are called "snap-action disc thermostats" and control the electricity flow to the fuser lamps

Question about magicolor 2200 DeskLaser Printer

1 Answer

...turn of the machine, if it comes back on the fusing unit the (Hot part) needs to be replaced Upper fuser roller (UFR) carries the lamp. Check the thermistor and thermostat also before replacing ...

Question about magicolor 2200 DeskLaser Printer

1 Answer

...for our copier, but this one has me stumped... What does C-0500 mean? How can I fix it? Fuser unit problems.Check fuser lamp in the upper and lower fuser roller,check the termofuse &

Question about magicolor 2200 DeskLaser Printer

1 Answer

...Fuser unit malfunction code.Verify the fuser heatre lamp continuity,clean and check the thermistors and thermofuse continuity.Open the front door,press the service reset button close the front

Question about EP1031/1031F CS/PRO Copier

1 Answer

...C 50 on the screen Verify the continuity of the fuser heater lamp.90% the lamp is open.You need change the fuser lamp and the fuser roller(the heater lamp is in the roller and is not

Question about EP1031/1031F CS/PRO Copier

1 Answer

...off then on if returns means that the fuser the hot part is dead. have to replace the upper fuser roller and lamp. service technician required unless you bye the parts and replace with service

Question about EP1030/1030F CS/PRO Copier

1 Answer

what do i do when machine display C05o.ca Change the fuser unit.The fuser heater lamp is not changebel.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment and Supply Experts

Adorjani Laszlo

Level 3 Expert

1316 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6850 Answers

Ed
Ed

Level 3 Expert

476 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...