Questions & Answers for: Xerox where is the fuser lamp

Ad

Question about DocuColor 12 Color Copier

1 Answer

error 10186 docucolor 12 what can i fix it thanks 10-186 is a fuser problem.Check for jammed paper in fuser or low fuser oil.Might have bad fuser lamp or fuser thermal fuse.

Ad

Question about WorkCentre M20i All-In-One Laser Printer

2 Answers

...fuser lamp. You can try turning the printer off for about ten minutes to cool the machine off and then turn back on. If that doesn't work you would need a new fuser unit. The fuser is located behind ...

Ad

Question about WorkCentre M20i All-In-One Laser Printer

2 Answers

fuser lamp alone will be about $60.00. that would be the best case scenario if the rest of the fuser parts are ok. the upper fuser roller is 135.00 and lower 144.00. That code is for a defective FUSER

Question about Phaser 7750DN Laser Printer

1 Answer

...fuser Main Lamp has failed and your fuser won't heatup so the sensor that controls the temperature gives that error and you have to replace the fuser part number 115R00025. Open the left cover unit ...

Question about CopyCentre C20 Black and White Copier

1 Answer

...a connector and four screws. You can pull the whole fuser assembly out very easily. There is no spare part for the lamp itself. You must replace the fuser unit (which contains the lamp +

Question about WorkCentre 432 ST Copier

1 Answer

...fuser lamp heats the roller that melts toner into the paper as the copy comes out the machine. If you see the light thenit is an optics movement or lamp problem. It could be a thermo fuse fuser lamp ...

Question about Phaser 3100MFP/S Laser Printer

2 Answers

...error fuser temp" Disassemble fuser unit and inspect thermistor and thermostat for dirt or damges, and heater lamp for damages. Good luck. Waiting file...MSG error on Sharp Am-410...Please help ...

Question about WorkCentre PRO 128 Copier

1 Answer

...Lamp is 100 ohms or lower. No)Replace the Fuser Unit Yes)Check the resistance of the Sub Lamp between P600-1 and P600-7 for an open circuit or a short circuit . The resistance of the Sub Lamp is 100 ...

lamp and thermistor circuits from the AC Connector so you know what you're looking to replace before you even rip into the fuser. On the C123 & WC-5225 versions, there are slots for 8 pins (2 rows

...i m using it on 220v only and my fuser lamp are also of 230v. pls help me Can you feel any physical heat from the fuser. Sounds like either the thermistor that controls temperature or the lamp

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment and Supply Experts

Clive
Clive

Level 3 Expert

4345 Answers

Philip Hughes

Level 2 Expert

80 Answers

docukaaf

Level 1 Expert

38 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...