Questions & Answers for: Lexmark where is the fuser lamp

Ad

Question about T620 Laser Printer

2 Answers

...lamp are blown in the fuser. looking at the back of the printer the outer rear cover door remove it by opening to a 45 degree angle and lift it off. on the inner rear cover there are to flat head ...

Ad

Question about T520 Laser Printer

1 Answer

...fuser lamp or possibly no power getting to the fuser unit. As a customer, the only other thing you can do is to check the connections on both the fuser unit and where it goes into the printer. Make ...

Ad

...fuser and you will see the heat lamp lit up. this light should cycle on every 1 1/2 pages or so. any longer than that and it wont keep up with the print job Start trying a new tonercartridge. Gerrit ...

Question about T522 Laser Printer

2 Answers

...lamp circuit) on the fuser. the t520 t 522's have lamp holder problems that allow arching from the ill fitting metal contact to the end of the heating bulb. it is not uncommon for the end of this ...

Question about T520 Laser Printer

2 Answers

...lamp when looking on the right side of the printer. It might be necessary to remove the right side panel (the side where the power plugs in) to do this. There is one screw in the cavity where the ...

Question about T644 Laser Printer

1 Answer

lexmark t644 is showing "920.06 lexmark t644 is showing "920.06 service fuser error", how i will solve it? 920 error is cold lamp on fuser replace fuser will clear problem

...lamp on the fuser. I used to have this problem with other Lexmark models and was able to replace the thermister itself. The thermister is located on the top cover of the fuser. If you have a real ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...