Questions & Answers for: Minolta Magicolor where is the fuser lamp

Ad

Question about magicolor 2200 DeskLaser Printer

1 Answer

with whatever your specific printer is. However, if it is a laser printer, it is a problem with the fuser not getting hot enough. Try having the thermostats attached to the fuser unit checked

Ad

Question about magicolor 2350 Laser Printer

2 Answers

fuser jam The paper is crimping up into an accordian at the fuser. Drop the cover down and release the 2 green cilps and allow the paper to be pulled out Switch OFF and let it cool for 10 minutes. If ...

Ad

Question about magicolor 2200 DeskLaser Printer

1 Answer

...who can build computers. Please email me w/ an answer to pj37ul@windstream.net Might check the fuser unit and replace it, Main motor can not turn something is preventing that warm up mean fuser ...

Question about magicolor 2400W Laser Printer

1 Answer

...magicolor 2300w Print a test page, then when it jams, notice if the paper made it's way in to fuser (toward the back of the unit. If it got that far, your fuser may be bad. Let me

Question about magicolor 2200 DeskLaser Printer

1 Answer

Gel on Fuser came off I have a Minolta Magicolor 2200 that has two small spots where the gel coting came off the fuser sheet , it is not an actual roller it is a sheet of metal and gel that applies ...

Question about magicolor 2200 DeskLaser Printer

1 Answer

Magicolor 2200 error Service Call 1f fuser low therm What does this mean? We just replaced the transfer belt (cost $365), and then got this additional error message. Thanks in advance for any help you

Question about magicolor 2200 DeskLaser Printer

1 Answer

get message of fuser low therm 1F get message of fuser low therm 1F One of the two small thermostats, that are called "snap-action disc thermostats" and control the electricity flow to the fuser lamps

Question about magicolor 2400W Laser Printer

1 Answer

Konica 2300w jams paper on the fuser unit. The coming paper sticks to the fuser more than it should and gets torn while coming out. Could that be caused by a wrong toner type fill? As far as I know, ...

Question about magicolor 2400W Laser Printer

2 Answers

Konica Minolta 2300w starts it print approx 10cm done the page, the paper than comes out of the fuser and jams with approx 10cm of paper still stuck inside the fuser. It will print black text all OK, ...

Question about magicolor 3300 Laser Printer

1 Answer

magicolor 3300 reset fuser counter Log on to Hibana Service Commander program you have with this is very old printer (Sorry) Under life tab you reset the count for the fuser according to the service ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...