Questions & Answers for: idle sensor

Ad

Question about 2000 Focus

1 Answer

idle sensor? i have a 2000 ford focus and when i'm idling it sounds like its going to stall...is it my idle sensor? where is the idle sensor located? It could be a faulty idle speed control valve

Ad

...sensor integrates the idle (IDL) switch within the housing. The IDL switch detects when the throttle plate is closed and an idle condition occurs. The PCM is supplied with this input signal. IDLE ...

Ad

Question about 1993 Explorer Limited

1 Answer

...up and down, and also stalls put new idle position sensor on, would a new oxygen sensor possibly correct the problem EGR valve and evp sensor controls idle. Replace both it should fix the idle ...

idle stop sensor on my Dodge W150 truck with 318 doesn't seem to be working as it spews black smoke when it is started and then, when it is kicked down, the idle is too high. Idle stop adjustment ...

Question about 1988 B350

1 Answer

...idle speed whether it's hot or cold out. Then you have the 02 sensor which tells the computer how much oxygen is being sent out the exhaust. And lastly the idle air controller, this is what makes the ...

Question about 1988 B350

1 Answer

sensor the idle it idled right down,i checked all other vacuum lines they looked good,not making any other type of noise,if I hook the line back to egr map sensor it goes back into high idle It sounds

Question about 1988 B350

2 Answers

...sensor Idle rough Usually in the exhaust pipe near the engine. They don't usually cause a rough idle, and the check engine light should be on if you have a faulty sensor. oxygen sensor (O2 sensor) is ...

Question about 1988 B350

3 Answers

...Sensor? Idle Air Control valve. But that is not a sensor! Also there is such a thing as an IAT sensor, but that means Intake Air Temperature sensor ... which is usually a thermistor, or ...

What is the E- 41 error code RICOH DX 4542? Code E-41 Description Idling roller HP sensor remains on or off The idling roller HP sensor does not change status within 4.0 seconds after the idling ...

E-41 error code in ricoh DX 4542 ? https://printcopy.info/?l=en&mod=erc&brand=Ricoh&model=DX4542&code=E-41 Code E-41 Description Idling roller HP sensor remains on or off The idling ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

21920 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...