Questions & Answers for: nec mc-8541 Cars & Trucks

Ad

...and replace master cylinder 1996 dodge caravan 2.4 liter, automatic transmission, abs brakes disconnect brake lines from MC should be only 2. Remove the 2 nuts holding the MC on. replace in reverse ...

Ad

How do you bench bleed my new master cylinder before i install it on my 2001 Lincoln Navigator? Put the MC into a vice, and use a bleed kit, available from aftermarket parts stores. This kit has hoses

Ad

Question about 2000 Taurus

1 Answer

The brake pedal goes to the floor and I can not get them to pump up. I just changed my master cylinder. So, I presume that you had brake pressure before the MC change, ....? What you need to do first ...

trying to bleed the master on my 97 geo the new MC comes with a sheet of paper , telling exactly that. I buy raybestos MC, not clones and comes with instrutions. or google bench bleeding a MC, there ...

...can remove the entire MC. Put the new MC on, tighten the 2 nuts, hook up the brake lines, and connect the FLI. Then fill the reservoir with fresh brake fluid and fully bleed the brake system. ...

Question about 1985 CJ7

1 Answer

Clutch master cylinder? I have a 6 cylinder with 5 speed transmission. Occasionally, I would be at a stop in neutral and the engine would idle high with the clutch plate spinning. Yesterday I was in ...

front brakes calipers locking up ,new calipers ,new lines , new mc, whats left? brakes kept locking up replaced calipers and lines and master cylinder but still driverside locks up until I bleed only ...

Abs light on and pedal will not compress without pumping when I first start the car. Drives fine after. 2004 Isuzu rodeo 3l pumping means the MC is bad, or there are leaks. look for leaks takes what ...

Question about 2003 Galant

1 Answer

...fluid in the MC. This makes bleeding the system much easier, especially if your car has ABS. Disconnect the line closest to the MC which you do not intend to replace, or from the MC itself, and ...

brake pedal soft first part of movement,as if leaking fluid called spongy brakes
air in system or bad MC
if it leaks down, pedal, move slowly to floor heavy foot
that is bad MC, (zero leaks, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...