Questions & Answers for: needle plate

Ad

Question about Brother Sewing Machines

1 Answer

...needle plate instead of going into the hole. Just guide your fabric, letting it feed on its own. * Check your needle plate Make sure it's securely in position. * Change your needle plate If you?ve ...

Ad

Question about 132QRFB Mechanical Sewing Machine

1 Answer

...needle plate instead of going into the hole. Just guide your fabric, letting it feed on its own. * Check your needle plate and make sure it's securely in position. * Change your needle plate. If ...

Ad

Question about 132QRFB Mechanical Sewing Machine

1 Answer

...needle plate instead of going into the hole. Just guide your fabric, letting it feed on its own. * Check your needle plate Make sure it's securely in position. * Change your needle plate If you?ve ...

Question about 132QRFB Mechanical Sewing Machine

1 Answer

...needle plate. If that doesn't work,change your needle plate. If you've been using a straight stitch needle plate (a plate with a small hole, often used for sewing fine, delicate fabrics), switch to a ...

...needle plate won't stay tight--when you put the plate on it moves around and is easy to take off I had to remove the plate to blow air for dust and the plate fit back on very loosely and not tight ...

Question about 132QRFB Mechanical Sewing Machine

2 Answers

...the mount so that it is straight up and down. If the needle is still hitting the plate, the needle bar may be bent. That may be not be repairable even by a professional. I hope this helps. Cindy ...

Question about Se425 Computerized Embroidery & Sewing Machine

2 Answers

...needle plate and in the bobbin are for lint Be sure to install a brand-new needle frequently. A new sharp needle will more easily penetrate the fabric. Also, insure that the needle/thread/fabric are ...

Question about Se425 Computerized Embroidery & Sewing Machine

2 Answers

...needle-plate, there is a hole in the back with a ***** slot showing. How do I adjust that? What is it for? It adjusts the needle plate position front to back. It is most likely the screw that holds ...

...needle plate front to back. :) Some needle plates snap into place, but others are held by a small screw (sometimes two). It shouldn't really have any adjustment capability--because, when using a ...

Question about Se425 Computerized Embroidery & Sewing Machine

1 Answer

...needle plate I found a needle plate for $27 here: https://www.sewingpartsonline.com/needle-plate-new-home-503601001.aspx . There may be other vendors. Look online for Janome 503601001 to find them. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Chris Wetmore

Level 2 Expert

187 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...