Questions & Answers for: Zebra will not boot up

Ad

Question about Z4Mplus Label Printer

1 Answer

BOOT Block. The printer is not booting up the settings completely. Probably got corrupted. You will need to download the bootblock version for this printer & upload it via either USB or LPT1 port. You

Ad

Question about Z Series Z4000 Printer

1 Answer

boot up procedure with the three LEDS turning on and off and then ending up with the power LED on. At this point if you press the feed button to advance the label to the beginning of the next label it

Ad

Question about Z4M Printer

1 Answer

...not pass post test Printer powers on (power light lights) but display only shows 16 rectangles, never complete boot up. No other lights are on. Hello, You have a bad Logic Bd and it needs to be ...

Question about Z4Mplus Label Printer

1 Answer

how do i find the IP address on a Zebra Z4MPlus? If you can not see it in the LCD menu on the front panel, you can find it by printing the IP info on a label. There is a reset button near the Ethernet

Question about Z4Mplus Label Printer

1 Answer

not to boot would mean a processor fan or case fan is not cooling adequately causing a system restart to prevent damage from overheating. It could also be a hard drive that is failing because it is no

...boot cycleIf the device is still not giving the correct key output it may have a faulty keypad. If you need any more help then please do not hesitate to contact ...

Question about Symbol Technologies MC909X-G Series Barcode Scanner

3 Answers

...boot up, get error couldn't get PM power status, Says to close battery door, which is closed. And an error appears throughout the screen stating the message about. Mc9090 does not have a ...

Question about MC9090-G Barcode Scanner

1 Answer

...this article for fixes of a malfunctioning keypad https://www.bctp.com/motorolasymbol-mc9090-keypad-not-working Maybe you need to Clean it with alcohol. www.ibarcodesolutions.com Barcode Scanner ...

Question about Symbol MC3100 Wireless Mobile Computer Portable Terminal

2 Answers

...boot 28, 38 and 48-key keypad configurations: 1. Simultaneously press and then release the 1, 9 and Power keys. Do not hold down any other keys or buttons. As the mobile computer initializes, the ...

...not boot(Blank display). power, pause, error, data LEDS are glowing unplug it, open the side cover and check for broken or disconnected wiring plugs. make sure any wires are not touching the belt ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Zebra Office Equipment and Supply Experts

Gateway information...

Level 2 Expert

252 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Zebra Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...