Questions & Answers for: odb codes

Ad

...odb port it under the hood on top of the wheel well on the right side.... follow the link to how to test the EEC 4 electronic control system this van uses, also known as OBD 1. ...

Ad

I have a 1995 900s convertible with a display engine light on. Can I use a ODB I or ODB II code reader to read and clear the code? if you can find the plug m8 yes usually in drivers foot well behind ...

Ad

Question about 1995 900

1 Answer

odb codes=2001 ford windstar Is there a way to get the odb codes off my 2001 ford windstar without using a machine? no you need a scanner

...odb scanner? I have read some saying that for a code reader the engine light needs to be on but for scanners does not a code reader is just that it reads codes a scanner will read codes and will read ...

Question about 1993 Grand Caravan

1 Answer

odb code 14 odb code 32 Code 14=MAP sensor voltage output is outside the acceptable range.Code 32=Short or open in the EGR solenoid circuit. Check for loose, broken, or shorted wire in the EGR valve ...

Question about 1993 Grand Caravan

1 Answer

...dashboard, usually just below where the steering column is. The ODB reader will display a series of codes, which you can look up online to help determine what fault your vehicle's computer is

Question about 1993 Grand Caravan

1 Answer

codes in truck The 1998 IH uses an ODB-2 reader, which plugs into the socket directly below your steering column. Plug the ODB reader into the socket, start the vehicle, and stored codes will begin to

codes the ODB reader lists, look them up on the net and then take it from there. For me, i helped alot when i had issues with my engine management light going on after i replaces parts on the block. I

Question about 2006 Lucerne CXL

1 Answer

...ODB-II code reader to determine what codes are stored (which will also indicate what has failed in your car that caused the Check Engine light to illuminate). Once you have repaired the defects, the ...

...odb reader hooked up but it doesn't show any codes for what might be wrong tried to take the battery off for a minute to get the engine light off but it still stays on Does the code reader power up ? ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22408 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...