Questions & Answers for: Lincoln plasma diagram

Ad

Question about ELECTRIC K1756-1 PRO-CUT 25 PLASMA CUTTER

1 Answer

problems with Lincoln LINCOLN ELECTRIC K1756-1 PRO-CUT 25 PLASMA: all settings ok, air ok will spark on occassion and then nothing. tried everything put will only lit very seldom and then nothing.????

Ad

Question about Electric - Pro-Cut 80 Amp Plasma Cutter

1 Answer

Safety indicator coming on as soon as plasma cutter is switched on Probably the tip assembly isn't assembled properly.

Ad

Question about ELECTRIC K1756-1 PRO-CUT 25 PLASMA CUTTER

1 Answer

no reset What type of issues are you having?

Question about ELECTRIC K1756-1 PRO-CUT 25 PLASMA CUTTER

1 Answer

what kind of air compressor do you need to run a plasma cutter? (how many psi, gallons, volts... and any other info...?) Hi: You will need at least the following: 25 CFH at 120 PSI 30 gallon reserve ...

Question about Electric Plasma Cutter, Pro - Cut 25

1 Answer

Lincoln Pro Cut 20 cuts about 2 seconds then quits. I have 110 pis, 60 gal. compressor, plenty of air. Set regulator on machine @26 psi. Lights, cuts, quits almost exactly 2 seconds every time. Is ...

Question about ELECTRIC K1756-1 PRO-CUT 25 PLASMA CUTTER

1 Answer

on lincoln 25 plasma cutter There should be a electrical board in the rear under a cover. There are different configureation of some jumpers that can be changed. The diagram should be inside the cover

Question about Electric Plasma Cutter, Pro - Cut 25

1 Answer

need 2 capacitors for my plasma cutter 1500uf 240v the capacitors 0n the board are blown Need to replace 2 Kendall K05 105c 0305 942 1500uf 240v Hi, can you send me pictures of the caps, all sides. ...

Question about Electric - Pro-Cut 80 Amp Plasma Cutter

1 Answer

Lincoln electric pro cut 80 want arc Try replacing it as in remove and than put on again

i have a pro cut 25 serial # I2 04 03 01322 what do i have to do to switch it to 220 volts There should be a small red switch on the back, you can switch it there.

Question about Electric Plasma Cutter, Pro - Cut 25

1 Answer

want to change from 110v to 220v There is a small red switch on the back that you can use to switch it.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lincoln Welding Tool Experts

David Soto
David Soto

Level 2 Expert

408 Answers

Paul
Paul

Level 2 Expert

144 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a Lincoln Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...