Questions & Answers for: presser foot

Ad

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...presser foot. Unscrewed the leg so I could screw on the foot. The white piece to the right does not fit on my screw so it just sits against the material...please help. Turn power switch to "0" raise ...

Ad

Question about CS-8150 Computerized Sewing Machine

2 Answers

need presser foot holder ned a presser foot holder and a regular presser foot Here are the parts you need: Brother Sewing Machine Presser Feet & Shanks thing that holds presser foot spring nut

Ad

...PRESSER FOOT G TO MY MACHINE?? there are 2 type of presser bar foot clamps one allows you to snap on the foot--raise & then lower the presser foot holder until the cut out is directly above the ...

Question about Harmony 1017 Sewing Machine

1 Answer

...presser foot for a Janome 1017 here's some links,, check to see if any of these are the one you ...

...presser foot pressure. Space between feed dogs & presser foot is too tight to pull a piece of fabric out with foot down. Diagonal seams get pushed out. You should not be able to pull fabric from the ...

...presser foot be raised slightly on pfaff tiptronic 2030 to facilitate free motion quilting? There is not enough clearance with feed dogs down to freely move material to quilt. Thank you. You need a ...

Question about Harmony 1017 Sewing Machine

1 Answer

presser foot wont connect Removed presser foot to change it. The new one wont stay. Have the snap in snap out presser foot. Where can i get new one. Tried another presser foot from diffetent machine ...

...presser foot for ja nome schoolmate Please add a comment with the specific model of Janome Schoolmate sewing machine. Fpr the Janome Schoolmate S-3015, make sure that the needle is fully up and raise ...

presser foot? If it is presser foot, most likely you do not have the correct presser foot for your machine. Search the internet for the "make model presser foot" (substitute make & model with your

...presser foot bar and on the presser foot. Perhaps something has become loose, fallen off, or become damaged. Have you tried a different presser foot and, if so, does it work? If more than one presser ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Chris Wetmore

Level 2 Expert

187 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...