Questions & Answers for: Elna presser foot

Ad

Question about 1010

1 Answer

...presser foot When I release the presser foot (down) it goes VERY slowly and does not seem to go all the way down, therefore the material is not tight against the plate. Is this a cleaning issue? This ...

Ad

...presser foot lever on the Elna Lotus unique to this machine? I am trying to find a replacement part, as mine was broken in shipping. In other words are any of the other Elna model presser foot levers ...

Ad

Question about 945 Computerized Sewing Machine

1 Answer

where to purchase a serger 945 presser foot controller in Canada. I need the white presser foot control Try Central sewing Machines in Edmonton Alberta. Looks like they have it in stock

Question about 945 Computerized Sewing Machine

1 Answer

...Elna Pro 4 DE, Am unable to locate information on your machine. However, the presser foot lever is usually located behind and above the presser foot. Instruction Manual Elna Lock PRO 4DC 4DE ...

Presser Foot tension lever is position 2 and the Feed Dog is rising normally. Any thoughts please? Does the F Dog wear out in any way? Generally, the lighter the fabric weight, the heavier the presser

Question about 945 Computerized Sewing Machine

1 Answer

...presser foot and hand-rotate the handwheel and watch how the feed dogs are moving)? If not, check to see if the stitch length is set well above the zero (which means it sews in place)? Perhaps the ...

Question about 945 Computerized Sewing Machine

1 Answer

...presser foot lever is not working, the linkage may be broken and needs to be replaced. This is a common issue and will require a new lever or armature so you can operate the presser foot properly. ...

presser foot pressure or use a walking foot, roller foot, or teflon foot. If the pressure is too heavy, the presser foot may "push: the top layer of fabric in front of it so the top fabric is slightly

Question about 945 Computerized Sewing Machine

1 Answer

...is not ready to sew. Is the presser foot still raised? Is the presser foot attached correctly? Is the correct presser foot attached for the type of stitch selected? Is the bobbin winder

...presser foot to hold material between the foot and feeder dogs. The foot of the Elna 9000 computer does not keep the material in place to sew. The material is running loose. How do I fix that. Check ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machine Experts

Kelley Buchanan
Kelley Buchanan

Level 2 Expert

130 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Elation Relation

Level 1 Expert

7 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...