Questions & Answers for: Euro-Pro presser foot

Ad

we jave pfaff 1471 mod - pls explain how you get presser foot to move downwards to fabric, When presser lever is released. it seems like it is dry and needs some sewing machine oil on the shaft.

Ad

...presser foot up so the thread enters the tension so it will properly work when the foot is down for sewing. Check the needle to be sure it is inserted correctly - this is usually with the flat side ...

Ad

Question about 7500XH Mechanical Sewing Machine

2 Answers

...presser foot up. Again-make sure that presser foot is UP to allow thread to go into tension disks. Now it's time to thread those tension disks...ready? OK! Put thread on spool pin. Pull thread taut. ...

Question about Shark 80 - 7133

1 Answer

presser foot up and see if this eliminates the problem. Sounds opposite of the problem, but it is very important to do this to assure the tension control can keep the top thread at the correct tension

how to sew thick material Size 16 needle, don't put more layers under the presser foot than the height of the presser foot, see what your manual recommends

presser foot with that black thing that is just flopping around... well when the presser foot is down that thing should be locked into the side hole. when you have the presser foot up, put it into the

Question about 416 Mechanical Sewing Machine

1 Answer

...presser foot up, pull thread, it should pull smoothly, now lower presser foot, the thread should barely move. This should seat your thread in the tension discs. Also, a needle wouldn't hurt when you ...

Question about Denim Sewlution 380 Mechanical Sewing Machine

1 Answer

presser foot is up and tension when the presser foot is down. If this is not the case you did not get the thread in the tension unit or your upper tension unit needs so cleaing adjusting. If that does

...presser foot won't go up and down. Any suggestions? My presser foot won't go up and down. Any suggestions? it's very possible that a part in your machine has come loose or brokenit ...

Question about 9105 Computerized Sewing Machine

1 Answer

Presser foot does not lower. I got this machine from my MIL who never used it. The presser foot is stuck in the raised position. Flipping the lever does nothing. Is it possible to un jam the presser ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machine Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...