Questions & Answers for: Black & Decker remove base

Ad

Question about BDTF1010B Tower Fan

1 Answer

...top behind the buttons remove the two screws next you have to remove the base stand and their is one screw you have to remove then you can remove the front cover and you can get to the motor and

Ad

Question about BDTF1010B Tower Fan

1 Answer

...dusty inside of the fan. I followed the instructions posted and I still couldnt open the tower. I removed the two screws on top (behind the buttons); 8 screws on the base (bottom most and the one ...

Ad

Question about Black And Decker Cyclone 4 In 1 Multi-sander, Ms1000

1 Answer

base, then remove the washer, and pull the base straight down off the sander. If you can't get it to pull off, try gently rocking it a little as you exert pressure to pull it off. Random orbit sanding

Question about MS550GB Mouse 5 Amp Detail Sander /Polisher with 41 Piece Ac

1 Answer

...remove it from the sanding base and fit a new tip. Tip of the Sanding Base ( Fig. 3) When the sanding base tip is worn, it can be reversed or replaced. ? Remove the screw. ? Reverse or replace the ...

Question about String Trimmer Cordless 12" 18V

1 Answer

I have an old D810 B&D Strimmer and cannot remover the base to put new cord in...any suggestions please There are 2 detent buttons on the housing cap. Depress them and pull away from unit.

Question about String Trimmer Cordless 12" 18V

1 Answer

...remove it? Yes, there should be a lock hole on the base of the bump head, spin around until both holes align and stick a pin through them both and the base will be locked. Now spin the head off. The ...

Question about B2300 Bread Machine

2 Answers

...base of the machine.( Be sure to unplug machine when checking belts) Check to make sure the pan is properly inserted in the machine. Hank Here's a tutorial on removing the cover from a B2300 ...

Question about Black and Decker CBG5 SmartGrind Blade Coffee Grinder - White

1 Answer

...base or plug in liquid or under running water. 2. Never use harsh detergents or abrasive cleansers or scouring pads to clean any part. 3. To remove residue or aromas left behind by nuts, grind one ...

Question about 14.4 Volt Battery Charger #5101181 02

1 Answer

how long do i charge the battery for? it has been sitting unused for quite sometime The charger base automaticly charges the proper length, remove when the light turns green

Question about Mouse Sander/Polisher

1 Answer

How does the sand paper attach to the removeable bases? There is a screw that keeps the base on. Nothing is sticky to hold it there? The piece that is like velcro is great but it somehow needs to be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Black & Decker Dryer Experts

Brad Brown

Level 3 Expert

18108 Answers

Tom Chichester

Level 3 Expert

54195 Answers

Chris Huff
Chris Huff

Level 3 Expert

6289 Answers

Are you a Black & Decker Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...