Questions & Answers for: Bowflex remove base

Ad

Question about Treadclimber TC5300

1 Answer

...Remove rear covers and using a 9/16 wrench lossen the four bolts that secure treadle assembly to base. Place a 3/4 inch piece of plywood or a 3/8 inch socket extension in between the treadles in the ...

Ad

...up the button which still would not release the pin. Finally I took the base (4 screws) off and removed the two metal brackets held on with two screws on the side that was stuck. It came apart ...

Ad

Question about Selecttech Dumbbells

4 Answers

...base and pull apart the two halfs you will find a large black square which is held in place by 2 more screws, remove these and pull out this square, you will now have access to the underside of those ...

Question about Treadclimber

1 Answer

base of the machine. Remove the covers. Put the screws in the covers so you don't lose them. Note that the top screw is recessed deeply into a hole in the cover! Removing the side covers has exposed 4

Question about Selecttech 1090 Dumbbells

1 Answer

...remove them from the holder Hi I called 1-800-628-8458 (the number in the manual) after trying several of the methods shown here. None worked. your dumbbell needs to be on a flat surface, no roll the ...

...that won't allow leaving base? One of the weights is most likely a little off in the base. To unstick, remove the four screws on the base, then the two screws on clip. Handle will then

Question about TC1000 Treadclimber

1 Answer

...Motor Control Board. If you tip the machine carefully onto it's left side with the side plastics removed you can see this

Question about Selecttech Dumbbells

2 Answers

base. You may need to remove the weight plates from the base to accomplish this check. Remember to put each weight plate back in its appropriate location with the selection ****** facing away from the

Question about Treadclimber TC5300

1 Answer

...Remove right rear base plastic cover to allow access to LED board. Caution: Machine is on. Current is active!! 4. Locate LED D on the motor controller board. LED may be lit or unlit. 5. Manually ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Bowflex Sport and Outdoor - Other Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Paul Carew

Level 3 Expert

3455 Answers

ray gallant
ray gallant

Level 3 Expert

64222 Answers

Are you a Bowflex Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...