Questions & Answers for: Eureka remove base

Ad

Question about 2271 Bagged Upright Vacuum

1 Answer

...belt how do you remove the base to change the belt Turn vacuum over, remove looks like 3 or 4 screws, then the top cover will come off, exposing the belt and brush roll. Part 61520 style J

Ad

Question about Altima Upright Vacuum Model 2996AVS Vacuum

1 Answer

...Remove and discard belt. Step 6: Place new belt around motor shaft. Step 7: Place new belt around brushroll pulley. Step 8: Align left end cap with base. Push end cap securely into place. Make sure ...

Ad

Question about Whirlwind Litespeed 5740 Bagless Upright Cyclonic Vacuum

1 Answer

...base on a counter. You will find several screws that hold on the hood, remove them. Turn the machine back to the upright position and remove the hood. On the right hand side,if your looking the front ...

Question about Altima Upright Vacuum Model 2996AVS Vacuum

2 Answers

Remove any strings or other debris from around the brush roller and place the new belt around the roller, sliding the brush roller back into the slots on the base of the vacuum. 5:Stretch the new belt

Question about 4870SZX BOSS SMARTVAC PET LOVER Bagged Upright Vacuum

1 Answer

...arrows next to them. take the base plate off and remove the brush roller and the old belt off being sure to put on bear floor then put the belt on the drive shaft put the brushroller in left side ...

Question about 4700A Maxima Bagless Upright Vacuum

1 Answer

...maxima 4704 If you don't see clips or screws the underneath (base), there may be be 2 screws on the top side that have to be removed. This will allow you to remove the bottom in order to replace

Question about Surfacemax 200 Bagless Upright Vacuum

1 Answer

base and remove the old belt from the brush roller and pulley rod. With the brush roller off of the unit, clean the brush by removing any strings or cords wrapped around the tube. Install the new belt

Question about 4235AZ Upright Vacuum

1 Answer

...Remove brush roll and belt. Thread new belt around motor shaft and brush roll (Fig. 4). 5) Insert left end of brush roll first. Make sure end cap fits into base. Pull right side of brush roll to ...

Question about Uno 2998AZ Bagless Upright Vacuum

1 Answer

base cover, then remove the roller assembly from the vacumm base to replace the belt. After you remove the roller assembly put the new belt on the pulley inside the vacuum first, then install the belt

Question about 2971AV EZ Kleen Bagless Upright Vacuum

1 Answer

...base to gain access to the belt and brushroll. Remove your brushroll and the broken belt. That vacuum takes a Eureka EXT-U belt. Use your brushroll to stretch the new belt into place. Let the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Eureka Vacuum Experts

Alan Matzke
Alan Matzke

Level 2 Expert

99 Answers

JoeVacs

Level 2 Expert

445 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...