Questions & Answers for: Sharp Aquos remove base

Ad

Question about Aquos LC-32G4U 32 in. HD-Ready LCD Television

16 Answers

base where the board is mounted using a small wire brush and scotch brite, cleaned the surfaces with alcohol and reinstalled making sure the screws were tight. This was done 4 days ago and have had no

Ad

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

remove. Once that is done, the base can be removed from the monitor. Best way is to lay the monitor face down on a tabletop padded with foam, a quilt or blanket, etc to protect the screen as you work.

Ad

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

...of the tv about 4" inches from the bottom. lay the tv set flat on your bed. you will need a metric allen wrench to remove the 4 screw. once the 4 screws are removed slide the base away from the

Question about Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

remove the base I can't slide the metal sleeve out. I have removed the 4 long screws but it still is stuck. With the 4 long screws removed, it should come out. Here's where you can download the manual

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

remove the base from a Sony KDL-40S2030 tv I cannot remove the metal strut that supports the base to my Sony KDL-40S2030 tv. I have removed the plastic base plate by taking out the four screws beneath

Question about AQUOS 52" Flat-Panel LCD HDTV

2 Answers

Hdmi not working all of a sudden, both inputs. I know for certain it is not the cable. I tried both my ps3 and dvd player. It is for some reason not reading the input. There is a green screen and it ...

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

removing the base stand Hello; I am a Sharp service center. Every one of their sets I have seen so far has 4 Allen head screws that are recessed to mount the base to the set down near the bottom. You ...

Question about Aquos LC-42D62U 42 in. LCD HDTV

0 Answer

...built it you have to open gently side by side pressing with screw driver when you have open it the remove the rubber buttons plate the alcohol based spray on the circuit board at the all buttons ...

Question about Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

...stand remove the four screws from the bottom back of the television and remove the stand. If you also wish to remove the post from the stand base unit you can remove the four screws that attach

Question about AQUOS LC-55LE620UT 55" LCD TV

1 Answer

remove base of sharp lc-52e77un can you help me remove my base off of my tv http://www.retrevo.com/support/Sharp-LC-52E77UN-TVs-manual/id/23457ag122/t/2/Check this link to download the user manual to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...