Questions & Answers for: tp sensor

Ad

Question about 2000 2500

2 Answers

...TP) sensor electrical connector. Remove the TP sensor attaching screws Remove the TP sensor Remove the TP sensor O-ring seal Installation Procedure Install the TP sensor O-ring seal (7) on the TP ...

Ad

TP) sensor electrical connector. Remove the screws and the TP sensor. Throttle position (TP) sensor electrical connector TP sensor To install: Install the screws and the TP sensor. Tighten screws to 7

Ad

...TP sensor retaining screws electrical connector (2) from the TP sensor (3). Remove the TP sensor electrical connector (2) from the TP sensor (3). Detaching electrical connectors prior to TP sensor ...

Question about 2003 Sorento

1 Answer

...TP sensor signal circuit is shorted to ground TP sensor VREF circuit is open or shorted to ground Trouble Code: P0700TCU Request For MIL -ON- Possible Causes:poor connection TCM Trouble Code: ...

...TP sensor retaining screws electrical connector (2) from the TP sensor (3). Remove the TP sensor electrical connector (2) from the TP sensor (3). Fig. Detaching electrical ...

...TP sensor voltage at PCM terminal 89 below 0.10 V after engine start, PCM determines that TP circuit has a malfunction. POSSIBLE CAUSE • TP sensor malfunction • Connector or terminal malfunction • ...

...TP sensor connector is damaged (check pins for damage, and for moisture) TP sensor signal circuit is open or shorted to voltage TP sensor ground circuit is open TP sensor has failed TP sensor not ...

...TP sensor connector. Unscrew the 2 TP sensor attaching screws and retainers, and remove the TP sensor. To install: With the throttle valve in the normal closed idle position, install the TP sensor on ...

TP sensor - where is it located on engine of 2002 4.0 ford ranger P1121 - Throttle Position (TP) Sensor Inconsistent with MAF Sensor The PCM monitors a vehicle operation rationality check by comparing

...TP sensor retaining screws electrical connector (2) from the TP sensor (3). Remove the TP sensor electrical connector (2) from the TP sensor (3). Installation Procedure Install the new O-ring on to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

john h

Level 3 Expert

22486 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...