Questions & Answers for: whirlpool top loading grinding noise

Ad

Question about KAWS850LE Top Load Washer

1 Answer

...grinding noise and the spinning stopped. When I turn the direct coupler by hand (after I took it a part again) it seems to catch (but dose not turn the shaft) and sometimes seems to jam. My question ...

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...WHIRLPOOL MODEL #LSQ9244EQO THANK YOU.PLEASE HELP So while you are holding the agetator is it ripping your hands? or is the agetator just sitting there? If the agetator is just sitting there you ...

Ad

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

top and spill over into the secondary. The coins will make a scraping or grinding noise during the spin cycle. We've had Whirlpool out twice to remove the bucket and discard the coins but at $100+++ a

...grinding noise, when I move control to just prior to rinse cycle water drains properly, but still just grinding or buzzing n washer fills with water and stops at the proper level but when agitator ...

Question about LTE6234D Top Load Stacked Washer/Dryer

1 Answer

Whirlpool washing machine Top Loading Model: LXR9445JQ1 purchased 1/5/2002 for $400 The washing machine has worked very well until last weekend. I put in the water/soap as usual and let it agitate for

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...or spin Washing machine works until it gets to rinse and spin cycle then it just stops it fills up with water but it won't spin and then makes like a grinding noise someone told me it could be a ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...Whirlpool Ultimate Care that was present in the house I rent; thus, I wasn't sure how old it was. It developed a loud grinding noise but continued to work until two days ago when it stopped draining. ...

Question about 3.2 cu. ft. Plus Washer

1 Answer

...Whirlpool manufactured top loading washers use a motor coupling between the drive motor and gearcase (transmission) in place of a drive belt. This configuration is known as "direct-drive". The ...

Question about Calypso GVW9959K Top Load Washer

1 Answer

...grinding noise, I get a C1 error and it stops. When running forward (spin cycle) it is smooth, no noise. Why? I took the cap off the inside of the washer and remove the floating bottom to see if ...

...down, there is a low pitch grinding noise and the agitator stops spinning with drum. It happens during the last 5 seconds of the spin cycle. Any help? sounds like the bearing is tarting to get worn ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...