Questions & Answers for: whirlpool ultimate care drum bangs

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...ultimate care 2 is in spin cycle it bangs against the sides . if new did you remove shipping strap in back..the unit cant lean more than 2 degrees..make sure clothes are even in tub..try to wash ...

Ad

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Whirlpool Ultimate Care II drum does not spin. Drum does not spin during any spin cycle, all other cycles work fine. Took apart motor to see if it was the coupling and it is good. When I spin the ...

Ad

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

GE Profile - Loud knocking on spin cycle Top loader, purshased in 2004, knocks loudly on spin cycle for approximately 15-30 seconds. Just random input, I apologize if this is of no help to ...

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

...bangs around like your beating a drum? please help One possible solution is to check the springs for the tub they are underneath there are 3 of them.. also the brackets that hold them in place might ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

WHIRLPOOL ULTIMATE CARE 2 WASHER. THE DRUM WILL NOT SPIN. SEEMS TO BE LOOSE. DRIVE BLOCK MAY HAVE UNSCREWED FROM THE TUB, CALL A REPAIRMAN

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

The tub does not seem to be stable. It bangs against the sides during the spin cycle. you may have a broken tub spring.

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Whirlpool Ultimate Care II clothes dryer. The drum does not turn...I'm thinking belt, but I am uncertain where to find the belt. The heating elemnt works, and I believe I am hearing the motor running.

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

...Whirlpool Ultimate Care II top loading washer. I loosened the rear cover to see what might be the problem but can't tell what is supposed to turn (other than the drum). Cannot really see a belt or ...

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

washer making loud noise and wont spin during the spin cycle, heard a banging noise, then it got progressively worse, after a few more loads during teh spin cycle the washer began to make a loud noise

Question about Ultimate Care II LSQ9549L Top Load Washer

1 Answer

on the spin cycle, it makes a banging noice, rythmic, about 2 per second....only on the spin cycle... can you help??? The spin cycle is used to rid the water by centrifugal force. As the tub spins, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...