Aiwa Logo

Aiwa Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 500 Products
  • 5K Answers
  • 364K Views

I have been having a problem with my above-mentioned turntable. What is happening is that when I load a record onto the platter and press "start" ... questions:if you put the arm on the record without start button,what happens? ... I have a pxe850 in my garage, i think it's a newer equivalent of the pxe800,

Aiwa Audio... | Answered on Aug 22, 2019


It probably is stuck due to failure of the mechanism.

Aiwa Audio... | Answered on Jul 10, 2019


That model is known to have bad solder joints around the transformer in the power supply. I would open it up and resolder all the terminals of the large transformer, with the unit unplugged ofcourse, and then check to see if it works.

Aiwa NSX-A115... | Answered on Jun 17, 2019


Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Aiwa-NSX-A777-manual/id/1076ci355/t/2/

Aiwa NSX-A777... | Answered on May 24, 2019


drive motor overheating or bad laser

Aiwa Z-R555... | Answered on May 05, 2019


I think the main drive belt is worn and I am going to buy a new one when I find a source.

Aiwa XR-M55... | Answered on May 02, 2019


look up manual or notify aiwa for asst

Aiwa Televison &... | Answered on May 01, 2019


Hello Emmett, for what you know, it is very possible that the contact that drives the engine has been stuck or stuck, that's why it's still working, you'd have to remove the bottom cover of the tray, with the power cable unplugged and find the key in question and unlock it
If you have technical knowledge, he sent you the service manual,
but go to a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil


Hola Emmett, por lo que cuentas, es muy posible que se haya quedado pegado o trabado el contacto que acciona el motor, por eso sigue funcionando, tendr?as que retirar la tapa de abajo de la bandeja, con el cable de corriente desenchufado y encontrar la llave en cuesti?n y destrabarla
Si tienes conocimientos t?cnicos, te envi? el manual de servicio,
sino dir?gete a un servicio t?cnico especializado
espero puedas resolver el problema
Saludos Franco Dosil
https://www.manualslib.com/manual/869440/Aiwa-Px-E860.html

Aiwa Audio... | Answered on Apr 26, 2019


Hello Reinaldomd, your failure originates in the extraction system of the CD
I enclose a work that the people of Tecnicoreparacion have done, in which they describe the fault and give solution to it
I hope you solve the problem
Greetings Franco Dosil
Hola Reinaldomd, tu falla se origina en el sistema de extraccion de los CD
Te adjunto un trabajo que han realizado la gente de Tecnicoreparacion, en la cual describen la falla y dan solucion a la misma
Espero que logres resolver el problema
Saludos Franco Dosil

https://tecnicoreparacion.blogspot.com/2014/01/reparacion-de-aiwa-sony-cx-bk1-mode-err2.html

Aiwa BMZ-K1 CD... | Answered on Apr 25, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Aiwa Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Tom Chichester

Level 3 Expert

53777 Answers

Are you an Aiwa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...