Alba Televison & Video - Page 6 - Recent Questions, Troubleshooting & Support


The applicable code would be in a compatible remote.

Alba Televison &... | Answered on Mar 24, 2017


hello some of these new tvs have an all in one switch bottom right press it in, either move up or down for either tv or dvd, thanks, ps if it's an oldish tv press source or input on the side of the tv

shaun

Alba Televison &... | Answered on Feb 16, 2017


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

Alba Televison &... | Answered on Feb 09, 2017


Go to the initial set up procedure and disable the second audio program (SAP).

Alba Televison &... | Answered on Feb 01, 2017


Laser pickup unit fault. Check and replace it. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/

Alba Televison &... | Answered on Jan 29, 2017


That would require me to see the mount and then a trip to Orchard for the bolts needed.

Alba Televison &... | Answered on Jan 19, 2017


POOR AERIAL SIGNAL, CHECK THE COAX JACK IS ON PROPERLY. NO OUTER STRANDS OF WIRE SHOULD BE TOUCHING INNER COPPER CORE. OR CHANGE CABLE & GO INTO THE BACK OF A SKY BOX TO THE TV, THEN RESCAN.

Alba Televison &... | Answered on Jan 16, 2017


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Alba Televison &... | Answered on Jan 12, 2017


Try a hard reset first. If it do not help you, the main board to this set is faulty and should be replaced. To make it a hard reset, unplug it from AC mains wall socket, and reinsert after an hour or so. Then check. If you wish to get more details visit the site linked here. http://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/

Alba Televison &... | Answered on Jan 08, 2017

Not finding what you are looking for?
Alba Logo

432 questions posted

Ask a Question

Usually answered in minutes!

Top Alba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Alba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...