Amana Logo

Amana Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 1K Products
  • 75K Answers
  • 2M Views

Possibly the filter both air and water. Make sure the lines aren't frozen. If the unit has an ice maker you can warm the lines with a blow dryer ( warm on low fan) make sure it's level. Is the trim gasket around the door worn?

Amana... | Answered on Jul 25, 2019


E 5 Usually means open fuse. Usually a secondary fuse behind the cover where the Blower is. If you change the fuse and still have no power you have a wire issue. Could be a loose connection, or a wiring shorting out somewhere.
Let's hope the fuse takes care of it. Be sure to unplug it before. Checking anything. 220 volt will hurt you. Hope this helps you..

Amana Dryers | Answered on Jul 25, 2019


The igniter or gas valve could be defective.

Amana Dryers | Answered on Jul 15, 2019


Is it heating the water? Many machines won't continue the wash cycle if the water temperature isn't achieved. Usually caused by blown heater element. I'm not familiar with your machine but generally it's a matter of removing the back panel, disconnect the terminals to the heater element, undo fixing bolt and pull it out. Should have a resistance of around 50 ohms, but if you're water isn't getting warm it's probably open circuit, ie infinitely high resistance. Replacement element is usually around £20.

Amana Washing... | Answered on Jun 26, 2019


Clogged screen on water valve. Turn off both water faucets.Remove hose from valve. Pop out mesh or plastic screen. May be debris. Could be low pressure too if this doesn't help.

Amana Washing... | Answered on Jun 25, 2019


You might need a new display board (electronic timer ). Seems like the timer will not send the message for the dryer to stop when the cloths are dry

Amana NED7200TW... | Answered on Jun 21, 2019


Theres a few solutions that could fix this. 1st I would let the unit thaw out could have ice built up on the air passage that wont allow the air to travel freely. Some caused by not having a good seal around the door.

Amana... | Answered on Jun 15, 2019


Remove top and front panel on dryer to access drum and replace drive belt. https://www.6ya.com/callphilipforhelp

Amana Dryers | Answered on Jun 12, 2019

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Amana Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Cindy Wells

Level 3 Expert

5960 Answers

Are you an Amana Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...