Andis Irons - Recent Questions, Troubleshooting & Support


The plug is probably not connected to the power cable. Could also be a bad cable or the connection to the clipper.

Andis Fade... | Answered on Jun 18, 2016


If the clippers stopped cutting, they are probably clogged with hair on the inside of the clippers. I had two pairs of clippers where this happened. I took them to be serviced at a beauty supply store and they cleaned the hair from the inside of both pairs of clippers for me and they now work just fine.

Andis SuperLiner... | Answered on Jul 29, 2014


Failure of the heating element or control circuitry

Irons | Answered on Oct 15, 2019


Heating element or control circuit failure

Irons | Answered on Oct 07, 2019


Use a steam iron or coffee machine descaler powder or liquid.

Irons | Answered on Sep 19, 2019


it could be a bad connection, a bad switch or a bad heating element. It must be disassembled to determine what the problem is. You might look up your model on a parts site and see if they have a breakdown picture. If they do not and do not sell parts, you have your answer. They are considered throw aways.

Irons | Answered on Sep 14, 2019


sometimes the bottom plate can be cleaned. they make polish for that. Normally, it isn't replaceable. The iron will have to come apart to replace the wire. I would not use it until you do as the loose wire might contact the case and then what would you do. Light up?

Irons | Answered on Sep 14, 2019


When cords won't retract, it's usually because they were pulled out too far, ie: past the red line on the cord.
Retractable cords have a limit to how far they can be pulled out in order for the spring to be able to "rewind" them back.
On products with retractable cords, they have a red line near the base of the cord to warn you to stop.

Irons | Answered on Sep 14, 2019

Not finding what you are looking for?
Andis Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Andis Irons Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Brad Brown

Level 3 Expert

18108 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you an Andis Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...